null
Toggle menu
Vertical Categories

* Raspberry Pi

Sub Categories

Raspberry Pi 5

Raspberry Pi 5

Raspberry Pi Accessories

Raspberry Pi Accessories

Raspberry Pi Arcade

Raspberry Pi Arcade

Raspberry Pi Boards

Raspberry Pi Boards

Raspberry Pi Cables

Raspberry Pi Cables

Raspberry Pi Cameras

Raspberry Pi Cameras

Raspberry Pi Cases

Raspberry Pi Cases

Raspberry Pi Cooling

Raspberry Pi Cooling

Raspberry Pi HATs and Add-On Boards

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Kits

Raspberry Pi Kits

Raspberry Pi Networking

Raspberry Pi Networking

Raspberry Pi Power Supplies

Raspberry Pi Power Supplies

Raspberry Pi Prototyping & GPIO

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens & Displays

Raspberry Pi Screens & Displays

Raspberry Pi SD Cards

Raspberry Pi SD Cards

Raspberry Pi Services

Raspberry Pi Services

Guides & Books

Guides & Books

Swag

Swag

Filter
View as:
Assembled - PicoIO64 with soldered 2x20 headers and socket for a Pico/Pico2 [W] with headers.

PicoIO64

$16.95
Assembled - PicoIO64 with soldered 2x20 headers and socket for a Pico/Pico2 [W] with headers.The PicoIO64 adds 64 3.3V I/O pins (5V tolerant) to the Raspberry Pi Pico using four 16-bit XRA1403 SPI I/O Expanders coupled with an 800mA 3.3V regulator. The...
Add to Cart
5V USB-C Dual Supply - Dual Ideal Diodes

5V USB-C Dual Supply - Dual Ideal Diodes

$6.95
Power from each USB-C input (A/B) connector goes via a MOSFET "Ideal Diode" to the USB-C output connector. USB2 data from the USB-C port (A) is connected to the output USB-C connector (USB3 data is not connected/passed through). The ideal diode...
Notify Me
Pico Dongle Lite

Pico Dongle Lite

$3.95
The Pico Dongle Lite is a small micro USB plug to Type-A plug adaptor designed for use with the Pico H/W from Raspberry Pi but will be useful for many other jobs. Whilst there are many similar adaptors are available, this adaptor is quite compact when...
Add to Cart
PicoADC16

PicoADC16

$18.95
PicoADC16 for Raspberry Pi Pico [W] The PicoADC16 is a 16-port 10-bit ADC (Analog-to-digital converter) supporting up to 3.3 volts with screw terminals for easier usage. The PicoADC16 is a 16-port ADC board with screw terminals using two 8-port MCP3008...
Add to Cart
Fan controller for Raspberry Pi - 2.54mm Horizontal

Fan controller for Raspberry Pi - 2.54mm Horizontal

$5.95
8086 Consultancy - Fan controller for Raspberry Pi - Horizontal 2.54mm (0.1")Raspberry Pi/Fan not included this is just a controller This is a small board with a load switch to allow a Raspberry Pi to temperature control a fan via GPIO3. It can be...
Add to Cart
Zero Camera Cable Adaptor for Raspberry Pi

Zero Camera Cable Adaptor for Raspberry Pi

$3.95
Connect Pi Zero and standard Raspberry Pi cables/cameras. The adaptor can be used to connect Pi Zero camera with integral (with 22-pin/0.5mm pitch) cable to full sized Raspberry Pi. Or with a 22 pin 0.5mm pitch cable you can connect up a Pi Zero to a...
Add to Cart
3v3 Sustain for Raspberry Pi 4

3v3 Sustain for Raspberry Pi 4

$4.45
Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and...
Add to Cart
Solderless Zero Micro Dongle for Raspberry Pi Zero

Solderless Zero Micro Dongle for Raspberry Pi Zero

$5.45
Convert your Pi Zero to a Micro USB dongle (no soldering required) Connect your Raspberry Pi Zero or Pi Zero W[H] directly to peripherals with a Micro USB port such as the Official Raspberry Pi Keyboard. When used with the official Raspberry Pi...
Add to Cart
Giant Butterfly's Full Hardware Kit

Giant Butterfly's Full Hardware Kit

$4.95
FOR USE WITH GIANT BUTTERFLY PCB Hardware Kit [ OPTIONAL ] The hardware kit includes everything  you need to mount the Giant Butterfly PCB on your Raspberry Pi and then mount up to four HATs. 2xM2.5 18 mm M-F header 8xM2.5 12 mm F-F...
Add to Cart
APlusCam

APlusCam

$4.95
What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The original version of this was a PCB, but I've now updated it to...
Add to Cart
USB/PWR Splitter

USB/PWR Splitter

$2.95
The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type...
Notify Me
ClusterCTRL Stack

ClusterCTRL Stack

$59.95 $99.95
The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU. 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin header for...
Add to Cart
I2C Multiplexer (8 way) pHAT for Raspberry Pi

I2C Multiplexer (8 way) pHAT for Raspberry Pi

$10.95
The I2C multiplexer allows connecting multiple I2C devices with the same address onto a single I2C bus (PCB colour may vary). For each multiplexed output there are 4 pins - data ports SDAx, SCLx GND ground and V for power. The "V" output can be altered...
Add to Cart
Giant Butterfly PCB

Giant Butterfly PCB

$3.95 $4.95
Allows four HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected, ID_SD and ID_SC (HAT EEPROM) have cuttable solder jumpers. For HAT/pHAT with an EEPROM (required by the HAT specification) you will...
Choose Options
Solderless Serial to USB adapter for Raspberry Pi Zero

Solderless Serial to USB adapter for Raspberry Pi Zero

$9.95
Caution! This product is NOT compatible with the new Raspberry Pi Zero W 2 Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). The...
Notify Me
USB Console Stub - Serial adaptor for Raspberry Pi

USB Console Stub - Serial adaptor for Raspberry Pi

$4.95
USB to (3.3v) Serial adaptor for use with the Raspberry Pi with a pinout designed to plug straight onto Pi GPIO pins (26 or 40 pin). Its a low cost no fuss adaptor which uses built-in USB-CDC drivers on most modern operating systems (Win10/Linux/Mac OS...
Add to Cart
Dual Supply for Raspberry Pi

Dual Supply for Raspberry Pi

$13.95
Dual Supply for Raspberry Pi (A+/B+/2B/3B/3B+) Power from each Micro USB connector goes via a MOSFET "Ideal Diode" which is then connected directly to the Micro USB socket on the Raspberry Pi. Data pins are not connected from either Micro USB port (as...
Add to Cart
Solderless Zero Dongle for Raspberry Pi Zero

Solderless Zero Dongle for Raspberry Pi Zero

$5.45
Connect your Raspberry Pi Zero or Pi Zero W directly to your computer for use as a USB Gadget device (USB Ethernet / Serial / Ethernet+Serial / etc.) or just for power. Works with all public versions of Raspberry Pi Zero. Can also be used with 8086's...
Add to Cart
Camera Cable Joiner/Extender for Raspberry Pi

Camera Cable Joiner/Extender for Raspberry Pi

$3.50
The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that’s simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as...
Notify Me
Butterfly PCB

Butterfly PCB

$2.95
Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM) which have solder jumpers – this allows HAT which follow the specification correctly...
Add to Cart
list

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.