Pimoroni PIM532 - Breakout Garden for Raspberry Pi 400 & 500Now at right angles! An easy, solderless, swappable way to use breakouts with your Raspberry Pi 400/500 - just pop up to three Breakout Garden breakouts (2 x I2C, 1 x SPI) into the slots and...

Adjustable sensitivity Analog Photocell Brick allow you to adjust sensitivity of analog Photocel to get digital signal or set a trigger value. Characteristics The 3-pins ports is easy to plug and play. Specifications Item | Parameter :-: | :-:...

A handy-dandy breakout that converts between the picoblade connector cable on the PMS5003 particulate matter sensor and a standard male 2.54mm pitch header. Use this breakout to connect a PMS5003 particulate matter sensor straight to your Raspberry Pi...

Pimoroni PIM575 - BME688 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity) The super-smart BME688 air quality sensor can measure temperature, pressure, and humidity precisely. It also has an upgraded, AI-enhanced gas scanner! Like...

A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure. It's Raspberry Pi and Arduino-compatible. We use this sensor on our Enviro+ environmental monitoring...

A tiny, RGBW-illuminated, clickable Trackball Breakout that's perfect for adding navigation or control to your Raspberry Pi or Arduino projects. We've taken a trackball module from everyone's favourite fruit-flavoured phone and added a bunch of clever...

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm. The LTR-559 is the same sort of sensor that you'd find next to the camera in your phone to detect when it's next...

A fast and precise environmental sensor that can measure temperature, pressure, and altitude. Our BMP280 breakout is Raspberry-Pi and Arduino-compatible. If you're looking for a simple temperature and pressure sensor, then this is the one to pick. It's...

L3G4200D is a 3 axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 degrees per second (dps).   The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and...

Description LCD display module with blue backlight Wide viewing angle and high contrast Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, Raspberry Pi DIY Users LCM type:...

0.91-inch White OLED Display Module (I2C Interface) The 0.91-inch White OLED Display Module (I2C Interface) is a compact screen ideal for adding clear visual output to microcontroller projects. With a 128×32 resolution and bright white pixels, it...

SparkFun Thumb Joystick Breakout BOB-09110 This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and include 4 mounting holes in the corners. Size: 1" x 1.25" Documents Schematic Eagle...

By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer counter, which species rotation counts are not limited. With the buttons on the...

This DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion is also known as Buck Converter or also as Step-Down Voltage Converter. The module is capable of altering the output of the power source/supply before...

Features: On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. On board then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. All pins of chip have been lead to can be...

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO...

If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The...

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all...

ElecFreaks Octopus:bit (Breakout Board For micro:bit) | EF03405 The Octopus:bit Micro:bit Breakout Board gives clear, instant access to all Micro:bit GPIO pins. A voltage-switch feature lets you toggle selected pins between 3.3 V and 5 V levels. Ideal...

Caution! The BBC micro:bit is NOT included. You can buy the BBC micro:bit here. Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of Kitronik Edge Connector Breakout Board! This...