Pimoroni PIM770 - Add a hardware volume control dial to Picade Max USB Audio. Picade Max Encoder is a small board with a digital rotary encoder conveniently pre-attached. Connect it up to the 'Encoder' port on Picade Max USB...

Pimoroni PIM769 - This super-smart Bosch sensor measures temperature, pressure and humidity precisely. It also has an AI-enhanced gas scanner function. Like previous sensors in the BME6XX series, this high quality sensor can be used to monitor...

Pimoroni PIM730 - Add 2.4GHz wireless and Bluetooth functionality to an existing project with this handy breakout featuring Raspberry Pi's RM2 module. RM2 uses the same two-in-one wireless and Bluetooth module that's found on Raspberry Pi Pico...

A button is a button, and an LED is a LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that...

Pimoroni PIM727 - Interstate 75 W (RP2350) - RGB LED Matrix Driver - Board Only - An all-in-one, RP2350 powered controller for HUB75 LED matrix panels. Interstate 75 W is a RP2350-based driver board for HUB75-style LED matrices - they're...

Pimoroni PIM728 - Tiny FX W - Wireless LED Effects Controller - Board OnlyAdd smart light and sound effects to models and dioramas with this small-but-mighty RP2040-powered programmable controller board - now with wireless connectivity!Tiny FX...

Adafruit 3296 - DS1307 Real Time Clock Assembled Breakout Board This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for...

Adafruit 997 - Plastic Water Solenoid Valve - 12V - 1/2" Nominal  Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National...

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they...

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock...

Adafruit 780 - Diffused Blue 3mm LED (25 pack) Need some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in daytime, and from any angle. They go easily into a...

Pimoroni PIM442 - 11x7 LED Matrix Breakout - A tiny, tightly-packed matrix of 77 individually-controllable bright white LEDs. Ideal for scrolling text, animations, bar graphs, or just general illumination, and it's Raspberry Pi and Arduino-compatible...

Pimoroni PIM745 - A 3-in-1 super sensor suite for environmental, light and movement sensing, with Qw/ST for easy, solderless connectivity. We heard you like sensors (we definitely like sensors!). So we combined three of our favourite ones into...

PIM722 -A minimal but powerful RP2350 breakout board modelled on a Pin Grid Array, with the maximum exposed pins crammed into the smallest possible space. PGA2350 is a compact RP2350 breakout designed to be embedded in projects where space is...

Detect fourteen distinct channels of light (from 380 nm to 1000 nm) with this versatile spectral sensor. The AS7343 is a 14-channel multi-purpose spectral sensor. It is optimized for reflective, transmissive and emissive measurements including color...

This cool mechanical encoder has five buttons (up, down, left, right and center) and a rotary scroll wheel (with satisfying clicky detents). We've surrounded it with 24 twinkly RGB LEDs and turned it into a handy, pre-assembled I2C breakout so it's...

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino-compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection...

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of...

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the buttons on your RF keyfob remote. When the A button is...

This super-cute 5x5 RGB LED matrix breakout is a neat way to visualise sensor data or for simple animations or notifications, and it's Raspberry Pi and Arduino-compatible. These little matrices are ideal for visualising data from other Pimoroni...