A small microphone with amplifier & threshold setting. It can detect when sound reaches a certain level. It can not detect a particular frequency and there is no support in the micro:bit programming environment at present for it to analyse...

Provides a variable voltage to an analog input via a twist knob – a volume control if you will. Can be used for any application where a user input across an analog range is required – for instance changing the frequency of the music output or...

A type of buzzer – it has to be driven by a pulsed output. It’s tuned for around 2kHz when it will be at its loudest but will produce a tone across a wide range of frequencies. In the Block Editor, the black lead goes on to GND and the blue...

Description A small version of the PIR that is used in a typical burglar alarm. It triggers when a warm body passes in front of the detector. It has some range / sensitivity setting capability and the duration of the output can be set. The black lead...

Good for detecting boxes, drawers or doors being opened and much more. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is somewhat polarity sensitive, the red & black leads need...

An external light sensor for all your light sensing needs. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is polarity sensitive, the red & black leads need to be on the correct...

A simple buzzer with transistor that can be powered by the micro:bit. Costs more than a headphone adapter but far less than the mini-speaker – its best use is to act as a sounder for an alarm or similar.

Compatible with micro:bit V1 only!   Caution! The BBC micro:bit, and MI:power board are NOT included. This is the ORANGE version of this case. This case has been designed to protect a BBC micro:bit with...

Add line following to your micro:bit buggy/robots with the compact Kitronik :Move Line Following Board for BBC micro:bit, also fully compatible with :MOVE mini. Add line following to your BBC microbit Robot/buggy projects...

This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's...

External Arduino Programming Cable lets you use a PC or Mac to develop Sleepy Pi Apps Compatible with Sleepy Pi 1 and Sleepy Pi 2 Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from...

The NEMA 23 Stepper Motor delivers 125 oz-in of holding torque with 200 steps per revolution. It offers accurate and repeatable positioning for robotics, CNC machines, and automation projects. This motor is a solid choice for makers and engineers needing...

Connect your Pi or any Blu-Ray player, Satellite Box, Cable Box, DVD Player, Media Player, or ANY device accepting the standard HDMI connector.

The Microsoft Internet of Things Pack for Raspberry Pi 3 is the best way to get started using Windows 10 and your Raspberry Pi as an IoT enabled device. A collaboration between Microsoft’s IoT division and Adafruit, this...

This little remote control would be handy for controlling a robot or other project from across the room. It has 21 buttons and a layout we thought was handy: directional buttons and number entry buttons. The remote uses the NEC encoding type and sends...

Socket to External Drivers converter board. It plugs into a Pololu stepper driver socket and re-routs the Step,Direction,Enable,Ground pins to the stepper motor ports connector. Forum discussion on external drivers for the Raspberry Pi CNC Hat: Using...

LEGO® compatible Raspberry Pi 3B, B+/2 case with lots of versatility. The SmartiPi is a very unique Raspberry Pi case.  The top of the case has A LEGO-compatible top plate that can be removed to see the Pi inside.  Other cool features...

The SmartiPi is a very unique Raspberry Pi case. It comes with a case for the Raspberry Pi official camera. The top of the case has A LEGO-compatible top plate that can be removed to see the Pi inside. The camera case also has a LEGO-compatible back. You...

This adapter converts an HDMI signal for display on a VGA monitor Convert digital HDMI to analog VGA + Audio with this adapter. Perfect for Raspberry Pi, PC, and laptop. Features: Product resolution up to 720P/ 1080i/ 1080P Product output...

Removable LEGO® compatible 6 x 10 top with four color options Works with the Raspberry Pi 3B, 2 and B+ Works with all GoPro® compatible mounts 3 holes that align with 75mm Vesa mounts Works with GPIO cables without strain relief Includes 4...