Specifications Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable Length: about 20 cm / 8 inch Material: High-quantity copper soft wire material for safe and durable Easy assembly:The cables can be separated to form an...

Waveshare 17939 - Industrial USB TO TTL Converter, Original FT232RL Onboard, Multi Protection Circuits, Multi Systems Support USB signal & Pinouts Definition 5V 5V output VCC 3.3V or 5V output, configured by...

USB To TTL, With Embedded Convertor - NOT COMPATIBLE WITH WINDOWS 11 USB to TTL 4-pin Wire specification: Embedded convertor: PL2303 Supports windows XP/7/8/8.1/10/... Connector: USB Type-A plug, 4-pin 2.54mm pinheader Pinout: Red - VCC...

This adapter allows you to use a 5.5 x 2.1mm DC power supply for a device that requires a 5.5 x 2.5mm power supply. Many of Allo's older audio boards feature the larger 2.5mm size, but their newer boards (2020) and Audio Power Supplies are all the more...

Caution! This product is NOT compatible with the new Raspberry Pi Zero W 2 Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). The...

Enables power to a USB device to be turned on/off via a USB power switch (MOSFET). Configuration Supplied with the PD (pull down) resistor set (Normally off). Connectors on top for GND / EN / 5V When the EN pin is connected to >2V (5V max) power...

USB Serial Adaptor Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access. Using jumper wires it can be used to access the serial on a Raspberry Pi and for Arduino programming (using...

USB to (3.3v) Serial adaptor for use with the Raspberry Pi with a pinout designed to plug straight onto Pi GPIO pins (26 or 40 pin). Its a low cost no fuss adaptor which uses built-in USB-CDC drivers on most modern operating systems (Win10/Linux/Mac OS...

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal...

USB 3.0 SuperSpeed adapters are a great way to quickly change the connection type or gender of an existing USB cable. This adapter has USB Type C Male opposite USB 3.0 Type A Female.  Features Connector A: USB Type C Male Connector...

USB Type-C to USB 3.0 A-Male Cable - 5FT

USB Type-C to USB 2.0 A-Male Cable - 5ft

USB Type-C to USB 2.0 A-Male Cable - 3ft

HDMI Cable, Gold Plated - 6ft

This assortment of colored heat shrink tubes is an essential. Suitable for electrical insulation, wire bundling, color coding, mechanical protection, wire/cable joints and daily repairs etc. Comes with 530 pieces of heat shrink tube in a plastic...

This 3 ft cable connects from microHDMI to full sized HDMI. It's a perfect fit for the Raspberry Pi 4 or 5, which features microHDMI ports.

Cat6 Ethernet Network Patch Cable RJ45 - 3ft

Raspberry Pi 4 Micro HDMI to VGA adapter

Waveshare 3965 - RS232 Communication Board, SP3232 On Board, 3V-5.5V, ESD Enhanced, Hardware Flow Control Supported The RS232 Board is used for establishing RS232 communication with devices powered from 3V - 5.5V. It contains SP3232 (RS-232...

Need more gigabytes on your Pi? Connect a SATA SSD to your Raspberry Pi with this compact, high-performance USB 3.0 to SATA adapter. Great for storing media, games, data, or backing up your projects! This new version of our USB to SATA...