This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace, and with these cables you will be able to easily incorporate those...

Waveshare 24017 - HDMI Signal Extender, 1080P High-Definition & Lossless Transmission, Transmission Distance Up To 50m Via CAT-5E/6 Network Cable - HDMI-EXTENDER-KIT Features Transmission standard: HDMI1.4B Max. transmission distance: 50M...

USB Type-C to USB Type-C Cable - USB 3.2 Gen 2 - 3FT (1 meter) - Black This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4, Raspberry Pi 5, and other USB Type C boards.  Specifications Connector A: USB...

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1...

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1...

Waveshare 20275 - DSI FFC Flexible Flat Cable 15cm - DSI-Cable-15cm DSI Flexible Flat Cable 15cm 22Pin To 15Pin Black EMI Shielding Film On Both Sides, Enhancing Anti-Interference Performance More Stable Signal...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable...

USB Type-C to USB 3.0 A-Male Cable - 1FT (30cm) - Black This USB-C to USB 3.0 cable lets you connect and charge your USB-C devices (hard drive, mobile, etc...) to a USB Type-A port on a computer, charger or tablet. Specifications Connector...

A 15cm extension cable for a microSD card. Insert your microSD card into one end and then connect the other end to your Pi / PC / anything with a microSD socket and voila, you're connected! Resources Dimensional drawing

Allo DC 5.5 X 2.1mm Input to Type C Output & DC 5.5 X 2.1mm Input to MicroUSB Output

Right Angle USB cable - A/MicroB This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a...

These three wire JST-SH to DuPont cables let you use the debug port of your Pimoroni Pico board for easy, solderless SWD programming. These cables are available with a choice of male or female DuPont (jumper wire) ends - you'll need the male version if...

These three wire JST-SH to DuPont cables let you use the debug port of your Pimoroni Pico board for easy, solderless SWD programming. These cables are available with a choice of male or female DuPont (jumper wire) ends - you'll need the male...

Waveshare 15817 - USB To RS232/485/TTL Interface Converter, Industrial Isolation This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical...

Multifunctional USB Power Meter - LCD Color Display - USB / Micro USB / USB-C A handy tool that measures voltage, current, power, charge time, and more for all of your USB A, Micro B, and USB C gadgets (phones, power banks, etc.....

A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. Note: this cable can be used with older models of HyperPixel 4...

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and...

Waveshare 21358 - USB-C Adapter For NGFF M.2 SSD, USB3.2 Gen2 Type-C Note that this adapter is ONLY for SATA M.2 SSDs. NVMe IS NOT supported! Features M.2 NGFF Protocol Support High-speed Transfer USB-C Connector: Transforming Your M.2 SSD Into...

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards. They will work where "thick pin"...