Advantages Simple & convenient installation  Doesn't prevent expansion Silky & smooth touch feel Light & thin material - only 1mm thickness Safe protection - waterproof, crash-proof

micro:bit Retro Programming Arcade is a color screen joystick expansion board for micro:bit V2, it contains a TFT 160*128 color screen, 4 directional buttons, two A/B buttons and a reset button. micro:bit Retro Programming Arcade can be used with...

A pushbutton on a lead for when you need another pushbutton or you want it away from your micro:bit One lead goes on 3v or GND and the other lead goes on 0, 1, or 2. For advanced applications it is feasible to connect two pins with the pushbutton. It...

A small motor that moves it's output arm to a position depending on the signal sent to it with a reasonable degree of accuracy & repeatability. The brown lead with the black croc clip goes on to GND, the yellow lead goes on to the Pin 0, 1 or 2 that...

This is a colorful strip based on WS2812B beads, it can display the color RGB and support multiple cascades at the same time. Characteristics Standard 3-pin GVS ports are easy to plug. Both ends are equipped with a connector and it supports multiple...

The Water Sensor Provides a variable analog reading depending on how wet/damp the sensor is. Good for plants or fingers. The black lead goes on GND, the red lead goes on 3v and the blue lead goes on whichever pin is being used in the program. This...

A very accurate temperature sensor using a calibrated chip called a TMP36GZ. It is accurate to ±1°C at +25°C. At this temperature it outputs 750mV. It changes by 10mV per °C. The black lead goes on GND, the red lead...

A standard 3.5mm stereo headphone adapter to two crocodile clips for Micro:bit This won’t give you stereo, but it does play in both ears! The black lead goes on GND, the green lead goes on 0. It doesn’t matter if they are put on the other...

A type of buzzer – it has to be driven by a pulsed output. It’s tuned for around 2kHz when it will be at its loudest but will produce a tone across a wide range of frequencies. In the Block Editor, the black lead goes on to GND and the blue...

A simple buzzer with transistor that can be powered by the micro:bit. Costs more than a headphone adapter but far less than the mini-speaker – its best use is to act as a sounder for an alarm or similar.

Description A small version of the PIR that is used in a typical burglar alarm. It triggers when a warm body passes in front of the detector. It has some range / sensitivity setting capability and the duration of the output can be set. The black lead...

Good for detecting boxes, drawers or doors being opened and much more. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is somewhat polarity sensitive, the red & black leads need...

An external light sensor for all your light sensing needs. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is polarity sensitive, the red & black leads need to be on the correct...

Smart Cutebot lithium battery pack. The Lithium battery pack for Smart Cutebot Car is a rechargeable battery in 3.6V, it is able to give a stable and powerful power source. The onboard power management system makes it much easier for charging. We have...

A small microphone with amplifier & threshold setting. It can detect when sound reaches a certain level. It can not detect a particular frequency and there is no support in the micro:bit programming environment at present for it to analyse...

ELECFREAKS EF08231 - Joystick:bit Kit, microbit Gamepad – Versatile Gaming Handle for Coding Take control of your micro:bit projects with the ELECFREAKS Joystick:bit V2 Kit! Designed for aspiring game developers, robotics enthusiasts, and STEM...

Octopus Electronic Bricks, you can use them to build electronics projects just as easily as piling bricks. By using Octopus electronic bricks, you can connect Arduino compatible boards easily with various digital, analog, and I2C/UART interfaces, or you...

A 3V Light Emitting Diode as an additional LED. It uses a high brightness low current LED and includes a current limiting resistor to protect the micro:bit’s output. The black lead goes on to GND and the green lead goes on to whichever Pin 0, 1...

Octopus TMP36 Temperature Sensor Brick for Arduino and micro:bit is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need any external...

The Christmas tree rainbow LED, with 6 coding LEDs, can help you to decorate a beautiful Christmas night. Features In Christmas tree shape, adapt to the Christmas scene With coding rainbow LED for any color you like. With crocodile clip lines, no...