The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to the micro:bit using alligator clips. Despite its small size, the speaker is pretty loud. Please note that the individual boards are packed in antistatic bubblewrap...

A capacitive moisture meter with temperature and relative humidity measurement. Compatible with micro:bit, Raspberry Pi, Arduino, Pico and most microcontroller boards. Monitor soil moisture, temperature and relative humidity measurement with the Plant...

The MonkMakes Servo for micro:bit provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

A rechargeable battery and acrylic case kit for your micro:bit. The Charger for micro:bit automatically charges while you are connected to USB. Make your micro:bits mobile without having to continually hunt for AAA batteries. Resources Datasheet...

Click Me to Download the Instructions for this kit. The Servo Kit for micro:bit makes it easy to connect up three servomotors from your micro:bit. Not only that, but the kit also comes with three servomotors and a battery box. Just add a micro:bit and...

The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. This relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even...

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery...

Plug a servo meter with 5.4mm (0.1 inch) header socket in, and connect croc/alligator clips to the rings, so that you can easily connect a servomotor to a ring-based microcontroller, such as the BBC micro:bit, Adafruit Circuit Playground Express or...

The MonkMakes RGB LED for micro:bit can be used to make any colour by controlling the red green and blue levels. Handily mounted on a PCB it connects to the micro:bit using alligator clips. Resources Datasheet (PDF) Instructions (PDF) Hi Res Images...

The MonkMakes Switch for micro:bit is a solid-state (no moving parts) switch that allows an output of a micro:bit to turn things on and off. This board can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or...

The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by the 7 segments of each digit. Powered directly from...

Works with Micro:bit v1 and v2. The MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right. The board uses a 10kΩ linear variable resistor (pot) to output a voltage between 0 and 3V that can...

The MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level. Features 3V and GND connections can be made from either side and allow you to power a second board such as the MonkMakes Relay...

Works with Micro:bit v1 and v2. The MonkMakes Connector for micro:bit makes it super-easy to connect I2C, SPI and other devices to your micro:bit without losing the main connector rings. Unlike other connectors that are designed to break-out all the...

The SparkFun weather:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure,...

We love games! We love writing games, building games and, yes, even building game consoles. That's where the SparkFun micro:arcade kit V2.0 for the micro:bit comes in! The kit includes our controller:bit carrier board, which gives you access to...

MonkMakes - SKU00104 - LED Arc - A NeoPixel Multicolor LED Arc This 10 LED, multi-color arc with pin header and ring connectors is designed to work with BBC micro:bit, Raspberry Pi Pico, ESP32 and Arduino. 10 individually controllable LEDs...

The SparkFun moto:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller...

This board is designed to dock with a BBC micro:bit using the micro:bit's edge connector. The board is a true CO2 sensor that also measures temperature and relative humidity. Features Low power -- power directly from your micro:bit CO2 0-5000ppm,...