Raspberry Pi SC0930 - Raspberry Pi DAC+ - Green PCB (Formerly IQaudio DAC+) Raspberry Pi DAC+ is a high-performance audio HAT compatible with any Raspberry Pi computer that has a 40-pin GPIO header. With the Texas Instruments PCM5122, it delivers stereo...

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You can use any 3.5mm stereo cable with this jack. The pins...

HiFiBerry DSP Add-On Board - 4260439550743This DSP add-on board adds digital signal processing capabilities to the following HiFiBerry sound cards: DAC2 HD DAC2 Pro DAC2 ADC Pro Digi2 Pro & Digi2 Pro Rev2.2 Amp 100 Have a look...

Raspberry Pi SC0928 - IQaudio DigiAMP+, Green PCB Raspberry Pi DigiAMP+ is a high-performance audio HAT. With its on-board Texas Instruments TAS5756M stereo amplifier, it delivers a direct connection to passive stereo speakers at up to 35...

The MonkMakes Amplified Speaker 2 is an easy to use amplified speaker on a circuit board. The board needs a 3.3 to 6V power supply that can be provided by a Raspberry Pi or Arduino. Audio input will normally be to the 3.5mm stereo audio jack socket,...

Bring your amplifier case design projects up to date with the Kitronik Bluetooth Stereo Amplifier Module (incl 2x 3W speakers) and play music from a phone, tablet or computer wirelessly. The kit is supplied with 2 x 4 Ohm 3W speakers, which have flying...

To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins...

Audio Codec HAT is a low power, high quality stereo CODEC designed for portable digital audio applications which is based on WM8960 IC that have the advantages like Low leakage, excellent PSRR and pop/click suppression mechanisms which allow direct...

A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old Yorkshire term meaning 'Shove Hardware In Middle' - we use...

XLR daughter card for IQaudio DAC Pro. 

InnoMaker HiFi DAC Audio Hat for Raspberry Pi The HiFi DAC Hat compatible with Raspberry Pi Zero, Zero W, 3B, 3B+, Pi 4 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get...

The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons. Build your own home-brew iPod Nano with Pirate...

Please note that due to supply shortages the acyrlic case stock for this product is now solid black instead of transparent black as shown in the product images. This is the VOLT+ With Stepped Attenuator. Includes VOLT+ Amp + Stepped Attenuator + Acrylic...

Revolution DAC - Digital input USB (uUSB), Analog output RCA 2.25Vrms The audiophile community is one big family united by the love of music. There is however, a fundamental split on how we judge audio hardware. One camp (objectivist) swears by...

Waveshare 14595 - 8Ω 5W SpeakerA set of speakers designed for specific Waveshare displays. The mounting holes will make them easy to integrate in your setup! Compatibility Waveshare 5inch HDMI LCD (G) Display, 800x480,...

If you are looking for a case for HiFiBerry DAC+,Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! HiFiBerry's best selling DAC with powerful onboard Digial Signal...

This is HifiBerry's smallest amplifier board, designed for the Raspberry Pi Zero. It can be used not only with the Raspberry Pi Zero, but also with the bigger Raspberry Pi B+/2 and 3.  Sometimes it just has to be small. For this use case...

If you are looking for a case for HiFiBerry DAC+, Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! HiFiBerry DAC+ Light with a pair of RCA jacks. It can be simply...

The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to the micro:bit using alligator clips. Despite its small size, the speaker is pretty loud. Please note that the individual boards are packed in antistatic bubblewrap...

The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured in Canada! This one is of many possible variations of this case. The UniPiCase ZW is incredibly...