Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You can use any 3.5mm stereo cable with this jack. The pins...

HiFiBerry DSP Add-On Board - 4260439550743This DSP add-on board adds digital signal processing capabilities to the following HiFiBerry sound cards: DAC2 HD DAC2 Pro DAC2 ADC Pro Digi2 Pro & Digi2 Pro Rev2.2 Amp 100 Have a look...

The MonkMakes Amplified Speaker 2 is an easy to use amplified speaker on a circuit board. The board needs a 3.3 to 6V power supply that can be provided by a Raspberry Pi or Arduino. Audio input will normally be to the 3.5mm stereo audio jack socket,...

Bring your amplifier case design projects up to date with the Kitronik Bluetooth Stereo Amplifier Module (incl 2x 3W speakers) and play music from a phone, tablet or computer wirelessly. The kit is supplied with 2 x 4 Ohm 3W speakers, which have flying...

Just Like HiFiBerry AMP2, But Better! The HiFiBerry AMP4 continues the legacy of our prior designs, but adds the 2nd header to incorporate our ‘daughter board’ add-on modules like the DSP processor.  It is a high-quality, highly...

To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins...

Audio Codec HAT is a low power, high quality stereo CODEC designed for portable digital audio applications which is based on WM8960 IC that have the advantages like Low leakage, excellent PSRR and pop/click suppression mechanisms which allow direct...

This new Digi2 is a revised version of the Digi+ model which is compatible with both the Pi4 rev. 1.5 and backwards. The new design features a second GPIO header that accommodates our add-on boards and has all the same features as our original model...

Power supply is not included The HiFiBerry AMP100 has been designed with more demanding speaker loads in mind. Just as with our other products, this new model features an improved signal path based on our DAC2 Pro section, but benefits from higher power...

A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old Yorkshire term meaning 'Shove Hardware In Middle' - we use...

XLR daughter card for IQaudio DAC Pro. 

The HiFi AMP Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ through the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering required. Easy to get more beautiful and fantastic sound by...

InnoMaker HiFi DAC Audio Hat for Raspberry Pi The HiFi DAC Hat compatible with Raspberry Pi Zero, Zero W, 3B, 3B+, Pi 4 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get...

Give your Apple iPod Hi-Fi® speaker system new life with the Airplay Audio Streaming Adapter. No wires needed, the adapter plugs right into the dock connector. The adapter powers a Raspberry Pi Zero W or Zero 2 W that digitally sends the audio signal...

Raspberry Pi/IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero and its onboard Dialog Semiconductor DA7212 codec. Codec Zero supports a range of input and...

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

We have two enclosures compatible with this HAT: HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 3 for Raspberry Pi 3, and HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 4 for Raspberry Pi 4. The Pi-DAC PRO, a new breed of...

We have two enclosures compatible with this HAT: HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 3 for Raspberry Pi 3, and HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 4 for Raspberry Pi 4. Raspberry Pi DAC+ is a high-performance...

IQaudio DigiAMP+ - Black PCB - Raspberry PI SC0369 IQaudio DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x35wpc with variable output. Ideal for a Raspberry Pi-based hi-fi...

The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons. Build your own home-brew iPod Nano with Pirate...