Pimoroni

A handy-dandy breakout that converts between the picoblade connector cable on the PMS5003 particulate matter sensor and a standard male 2.54mm pitch header. Use this breakout to connect a PMS5003...

Pimoroni PIM575 - BME688 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity) The super-smart BME688 air quality sensor can measure temperature, pressure, and humidity precisely...

A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure. It's Raspberry Pi and Arduino-compatible. We...

A tiny, RGBW-illuminated, clickable Trackball Breakout that's perfect for adding navigation or control to your Raspberry Pi or Arduino projects. We've taken a trackball module from everyone's...

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm. The LTR-559 is the same sort of sensor that you'd find...

A top of the line Pirate-brand RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic, and debug connectors... and built-in LiPo charging! We adore the versatility and...

A fast and precise environmental sensor that can measure temperature, pressure, and altitude. Our BMP280 breakout is Raspberry-Pi and Arduino-compatible. If you're looking for a simple temperature...

Protect your Pi Zero 2 W in style with the Pibow Zero 2 W case, in calming violet waters - ocean blue, purple, and deep blue! Raspberry Pi Zero 2 W is not included Note: this case is for the...

Raspberry Pi Pico and Pico Omnibus are not included A spacious 2.0" (320 x 240) IPS LCD display for Raspberry Pi Pico, with four buttons, an RGB LED and plenty of room for your Pico projects! This...

Raspberry Pi Pico is not included A conveniently sized, labelled proto-board add-on for your Raspberry Pi Pico, perfect for permanently attaching your custom circuits! With a 6x20 grid of 2.54mm...

Pimoroni PIM356 - noise:bit Make your micro:bit sing with noise:bit! It's a tiny speaker that packs a fair bit of punch, and it's perfect for BLEEPS and BLOOPS! Just slot...

Control and monitor your world with automation:bit! It's tolerant of up to 24V, with analog and digital inputs, outputs, and a relay, so it's ideal for automating low-voltage systems...

A demo board for exploring the digital video and audio capabilities of Raspberry Pi Pico, with HDMI connector, SD card slot, line level I2S audio and buttons. Raspberry Pi Pico is not included. Your...

Power-up your TV with Picade Console! It's a compact, Raspberry Pi-powered retro games machine with authentic arcade controls that plugs right into your TV, monitor, or other HDMI display. Picade...

A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality. Raspberry Pi and accessories are NOT included. Display HAT Mini features a bright 18-bit...

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just...

Automate your world with Automation HAT Mini! Monitor and control up to 24V systems and see their status on the gorgeous full-colour display. Don't be fooled by its size... Automation HAT Mini...

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. Raspberry Pi Zero not included If your...

Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! Inspired by Alex Ellis' work with his Raspberry Pi Zero...

Mini Black HAT Hack3r – Fully AssembledNeed to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you! A nifty little tool that lets you access all of the GPIO pins while also...