Pimoroni

Pimoroni PIM774 - Inky Impression 13.3”, 2025 Edition - 13.3” (1600 x 1200 pixel) Beautiful, colour E Ink® / ePaper displays for use with Raspberry Pi computers...

Pimoroni PIM773 - Inky Impression 7.3”, 2025 Edition - 7.3” (800 x 480 pixel) Beautiful, colour E Ink® / ePaper displays for use with Raspberry Pi computers...

Pimoroni PIM757 - Protect your Raspberry Pi Touch Display 2 with this tidy desktop display frame! 3 unique layers provide support and protection to the back of the screen 2 legs hold...

PIM715 - An expanded 2.8" (320 x 240 pixel) IPS LCD display add on for Raspberry Pi Pico / Pico W, with four buttons, an RGB LED and Qw/ST connectivity.   Pico Display 2.8" features a...

A retro 2.15" (128x64) mono LCD display for Raspberry Pi Pico with RGBW backlight, buttons and a Qw/ST breakout connector. A Raspberry Pi Pico / Pico W is not included. Pico will need to have pin...

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in three different colour schemes: red/black/white, yellow/black/white, and black/white! Inky pHAT's...

A programmable badge with fast updating E Ink® display and wireless connectivity, powered by Raspberry Pi Pico W. Badger 2040 W is a maker-friendly all-in-one badge wearable, designed for...

Add a bright, hi-res, square LCD screen to your Raspberry Pi (or Pico) projects with this 1.54" Breakout Garden-compatible SPI display. Now it's super-easy to incorporate into other Raspberry Pi or...

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels, and available...

A hackable, programmable badge with 2.4" (320 x 240) TFT LCD colour display, powered by Raspberry Pi RP2040. Tufty comes fully loaded with a quintet of buttons so you can easily change what's...

A high-resolution 8", IPS, 1024x768, HDMI display, with Pimoroni-made display driver board and keypad, that's perfect for building into projects like arcade cabinets, or just use it as a handy...

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels -...

Tufty 2040 - Tufty Only - PIM624 A hackable, programmable badge with 2.4" (320 x 240) TFT LCD colour display, powered by Raspberry Pi RP2040 We've had a lot of requests for a LCD version of Badger...

A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040. In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD display to make a...

A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040 - Badger Only In honour of Raspberry Pi's 10th birthday, Pimoroni fused a RP2040 microcontroller with an EPD...

Crisp, high-res, with great viewing angles (IPS), this 1.3" square, 240x240 pixel, colour LCD will add some pizzazz to your Raspberry Pi or Arduino projects. The square form-factor of this display...

Bold, will hold! A big, beautiful, 5.7" (600 x 448 pixel) 7 colour electronic paper display for Raspberry Pi. This display is considerably bigger than Inky wHAT (check out the comparison photo!)...

Raspberry Pi Pico and Pico Omnibus are not included A spacious 2.0" (320 x 240) IPS LCD display for Raspberry Pi Pico, with four buttons, an RGB LED and plenty of room for your Pico projects! This...

A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. Note:...

A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious...