Categories - PiShop.us

Sub Categories

Mega 2560 R3 Development Compatible Board

$15.95

This is an Arduino-compatible microcontroller featuring the ATmega2560-16U2 chip. Notes Recommended Input Voltage: 7-12V DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA 8KB of Flash Memory is used by bootloader This is an...

Notify Me

Uno Compatible Motor Control Shield (L293D Motor Driver)

$7.95

This is a motor shield for an Arduino Uno that makes it easy for your Arduino to control various types of motors! All you need to do is attach this to your Uno, run wires from your motors to the respective terminal blocks, and supply some external power...

Add to Cart

Compatible LCD Display 2.5″ (LCD 1602) (I2C communication)

$6.95

This is a very popular LCD for the Arduino or Freeduino board. It includes a 2×16 LCD display which is backlit in blue. It uses the I2C communications protocol so it is compatible with any Arduino or Raspberry Pi! Key Features: Supports I2C...

Add to Cart

LCD1602 Arduino Compatible LCD Keypad Shield

$6.95

This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The...

Add to Cart

4-Channel Relay Module – 5V

$5.95

This is a 5V 4-Channel Relay interface board. Be able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, etc.). Features 5V 4-Channel Relay interface...

Notify Me

Uno R3 Rev3 Development Compatible Board

$7.95 $12.95

This is an Arduino-compatible product Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board Reliable RESET...

Notify Me

USB Cable with Switch

$2.95

Caution! This switch is NOT compatible with the Raspberry Pi 4B. Please see the Type-C Power Switch for Raspberry Pi 4 instead. Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This...

Add to Cart

40 Pin GPIO Connector Header

$1.95

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made 2x20 female header. The female header part has extra spaces to make it tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin...

Add to Cart

:MOVE mini buggy kit (micro:bit not included)

$19.95 $34.95

CLEARANCE! Caution, this is the older model of the mini buggy. It's only compatible with Micro:Bit V1. The Kitronik :MOVE mini buggy kit for the BBC micro:bit provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled robot that is suitable...

Choose Options

Helping Third Hand Magnifier W/Magnifying Glass Tool

$6.95

Type a description for this product here...

Add to Cart

Mini USB Microphone

$5.95

Hey, listen up! It’s the world’s smallest USB microphone! OK maybe it’s not in the Guinness Record Book, but it is pretty darn small! This plug-and-play Mini USB Microphone needs no driver, and its USB interface means you...

Add to Cart

Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case - Smoke Base - w/ Clear Top

$7.95

Adafruit case for Raspberry Pi Model B+ / Pi 2 / Pi 3. This enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate, it is...

Notify Me

Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi

$15.95

If you're looking for the most compact li'l display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32 PiOLED is your little OLED pal, ready to snap onto any...

Add to Cart

Adafruit Raspberry Pi A+ Case – Smoke Base w/ Clear Top

$6.95

This enclosure was designed by Mike Doell – just like Adafruit’s elegant, beautiful, and functional Pi Case for Raspberry Pi Model B+ / Pi 2. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough...

Add to Cart

Raspberry Pi Zero W and GPIO Header Bundle

$14.95

This bundle includes the Raspberry Pi Zero W board, and a 2x20 male header that can be soldered into the Zero W for GPIO functionality. Unlike bare Zero W boards, this bundle may be purchased in any quantity. Includes Raspberry Pi Zero W Break-away 0...

Notify Me

Raspberry Pi Zero W and 16GB MicroSD Bundle

$19.95

This bundle includes the Raspberry Pi Zero W board, and a blank 16GB class 10 microSD card. Unlike bare Zero W boards, this bundle may be purchased in any quantity. Includes Raspberry Pi Zero W SanDisk Edge 16GB MicroSD Card - A1 U1 Class 10 - BLANK

Notify Me

Raspberry Pi Zero W and Case Bundle

$19.95

This bundle includes the Raspberry Pi Zero W board, and the beautiful UniPiCase designed for it. Unlike bare Zero W boards, this bundle may be purchased in any quantity. Includes Raspberry Pi Zero W UniPiCase Standard Version

Notify Me

Greater Scott Gadgets - YARD Stick One is a sub-1 GHz wireless test tool controlled by your computer.

Great Scott Gadgets YARD Stick One

$109.95

Greater Scott Gadgets - YARD Stick One is a sub-1 GHz wireless test tool controlled by your computer. YARD Stick One (Yet Another Radio Dongle) from Great Scott Gadgets can transmit or receive digital wireless signals at...

Add to Cart

Great Scott Gadgets ANT700 – 300MHz to 1100MHz Telescope Antenna

$30.95

ANT700 from Great Scott Gadgets is a lightweight telescopic antenna designed for operation from 300 MHz to 1100 MHz. Its total length is configurable from 9.5 cm to 24.5 cm. ANT700 is constructed of stainless steel and features an SMA male...

Add to Cart

Great Scott Gadgets ANT500 – 75 MHz to 1 GHz Telescope Antenna

$34.95

ANT500 from Great Scott Gadgets is a telescopic antenna designed for operation from 75 MHz to 1 GHz. Its total length is configurable from 20 cm to 88 cm. ANT500 is constructed of stainless steel and features an SMA male connector,...

Add to Cart