Mini Black HAT Hack3r – Fully AssembledNeed to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you! A nifty little tool that lets you access all of the GPIO pins while also running a HAT. Ideal for debugging your HAT projects or...

The Fish Dish is a breakout/add-on board for the Raspberry Pi (can be used with other boards too - Arduino, etc.) which makes it easy and extremely fun to use the GPIO on the Raspberry Pi. It plugs directly onto the GPIO pins with a 2 x 13 header...

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or...

The micro:bit Breadboard Adapter is a breadboard pinboard based on the BBC micro:bit. It plugs directly into the breadboard and breaks out each of the micro:bit’s pins, This breadboard adapter consists 2 arrangements of 22 micro:bit pins...

Transform your Raspberry Pi Pico into a electronic adventure playground packed with physical computing goodies including an LCD screen, motor drivers, a mini breadboard, and much more! Pico Explorer lets you play with circuits, build science...

Double up your GPIO pins and attach two add-ons to a single Raspberry Pi Pico with our expansive Pico Omnibus! Struggling to choose which Pico add-on to go for? Pico Omnibus lets you plug in two Pico Packs or Bases at once*, or you can use the extra set...

Built especially to showcase Raspberry Pi's low cost, feature-rich RP2040 chip, this board has VGA output, an SD card slot, digital I2S audio output, and more! Based on the reference design by Raspberry Pi our Pimoroni Pico VGA Demo Base is a great way...

Headers must be under the Picos once installed, for the display and most other add-ons to work.

FOR USE WITH GIANT BUTTERFLY PCB Hardware Kit [ OPTIONAL ] The hardware kit includes everything  you need to mount the Giant Butterfly PCB on your Raspberry Pi and then mount up to four HATs. 2xM2.5 18 mm M-F header 8xM2.5 12 mm F-F...

Description The CamJam EduKit 2 features the following components all neatly packaged in a project tin: 1 x Breadboard 1 x Immersible temperature Sensor 1 x PIR Sensor 1 x LDR 1 x Active Buzzer 1 x Red 10mm LED 1 x Blue 10mm LED 1 x 4.7K...

Description The CamJam EduKit features the following components all neatly packaged in a project tin: A 400-point breadboard 3 LEDs (Red, Yellow and Green) A button A buzzer Resistors and jumper cables The kit is accompanied by a set of...

Pi Module - PIco Fan Kit HV3.0 - PM_007 - w/ Fan, Mounting screws, Temperature sensor, Spacers & Connector Note: This kit requires assembly and soldering. Each PIco Fan Kit need to be installed on UPS PIco by soldering of few...

Pi Modules - UPS PIco HV3.0B+ HAT Stack 450 PoE - PM_073 Note: This product requires soldering. The Raspberry Pi PoE HAT is NOT included and needs to be ordered separately. The UPS PIco HV3.0B+ HAT Stack 450 PoE is an...

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23.5 mm tall: when placed on your Pi, a PCB will clear the...

Features Application: Single, double and triple row up to 150 pins Contact System: Tiger Buy™ Orientation: Vertical, right-angle Pitch: .100" (2.54 mm) Special Features: Standard and low insertion force contacts with .025" (0.635 mm) square...

External Programming Cable OR RPi Serial Console Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you...

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero. Little brother to ProtoDock, ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for...

The ProtoDock is an all-in-one desktop prototyping dock for your Raspberry Pi 4, Raspberry Pi 3 or any other 40-pin Model B Raspberry Pi! Similar to its little brother the ZeroDock, the ProtoDock keeps your desk tidy and all of your vital...

Allows four HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected, ID_SD and ID_SC (HAT EEPROM) have cuttable solder jumpers. For HAT/pHAT with an EEPROM (required by the HAT specification) you will...

Stack on top of your official POE HAT with this custom-made extra-tall 2 x 2 pin female header and 2 x 20 pin female header. This is a set of two headers which allows you to stack a POE HAT and another HAT on top of your Raspberry Pi This is...