Double up your GPIO pins and attach two add-ons to a single Raspberry Pi Pico with our expansive Pico Omnibus! Struggling to choose which Pico add-on to go for? Pico Omnibus lets you plug in two Pico Packs or Bases at once*, or you can use the extra set...

Built especially to showcase Raspberry Pi's low cost, feature-rich RP2040 chip, this board has VGA output, an SD card slot, digital I2S audio output, and more! Based on the reference design by Raspberry Pi our Pimoroni Pico VGA Demo Base is a great way...

Headers must be under the Picos once installed, for the display and most other add-ons to work.

FOR USE WITH GIANT BUTTERFLY PCB Hardware Kit [ OPTIONAL ] The hardware kit includes everything  you need to mount the Giant Butterfly PCB on your Raspberry Pi and then mount up to four HATs. 2xM2.5 18 mm M-F header 8xM2.5 12 mm F-F...

Description The CamJam EduKit 2 features the following components all neatly packaged in a project tin: 1 x Breadboard 1 x Immersible temperature Sensor 1 x PIR Sensor 1 x LDR 1 x Active Buzzer 1 x Red 10mm LED 1 x Blue 10mm LED 1 x 4.7K...

Description The CamJam EduKit features the following components all neatly packaged in a project tin: A 400-point breadboard 3 LEDs (Red, Yellow and Green) A button A buzzer Resistors and jumper cables The kit is accompanied by a set of...

Pi Module - PIco Fan Kit HV3.0 - PM_007 - w/ Fan, Mounting screws, Temperature sensor, Spacers & Connector Note: This kit requires assembly and soldering. Each PIco Fan Kit need to be installed on UPS PIco by soldering of few...

Pi Modules - UPS PIco HV3.0B+ HAT Stack 450 PoE - PM_073 Note: This product requires soldering. The Raspberry Pi PoE HAT is NOT included and needs to be ordered separately. The UPS PIco HV3.0B+ HAT Stack 450 PoE is an...

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23.5 mm tall: when placed on your Pi, a PCB will clear the...

Features Application: Single, double and triple row up to 150 pins Contact System: Tiger Buy™ Orientation: Vertical, right-angle Pitch: .100" (2.54 mm) Special Features: Standard and low insertion force contacts with .025" (0.635 mm) square...

External Programming Cable OR RPi Serial Console Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you...

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero. Little brother to ProtoDock, ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for...

Allows four HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected, ID_SD and ID_SC (HAT EEPROM) have cuttable solder jumpers. For HAT/pHAT with an EEPROM (required by the HAT specification) you will...

Stack on top of your official POE HAT with this custom-made extra-tall 2 x 2 pin female header and 2 x 20 pin female header. This is a set of two headers which allows you to stack a POE HAT and another HAT on top of your Raspberry Pi This is...

Color Coded Header for Raspberry Pi - Easy Pin Identification The Color Coded Header for Raspberry Pi Zero and Zero W makes GPIO pinouts easy to follow. Each of the 40 pins is marked with a color for fast identification. Red is 5V, yellow is 3V, black...

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO...

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in...

GPIO Hammer Header (Solderless) – Male Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or...

The perfect Raspberry Pi stocking filler this Christmas! The Christmas Tree solder kit is the designed for any maker or hacker and an ideal kit for people new to Raspberry Pi or even the experienced users who want to practice the art of soldering! The...

A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold separately) Includes 1x Solderless Prototype Breadboard...