Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted...

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and...

Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with the tiny little Pimoroni Zero LiPo! It aims to give you the most compact power supply possible...

Waveshare 18995 - Raspberry Pi 400 500 GPIO header adapter, header expansion, 2x 40PIN header - PI400-GPIO-ADAPTER-B The Raspberry Pi 400/500 GPIO Header Adapter breaks out the built-in 40-pin connector into a dual 2×40 pin header...

The Raspberry Pi Build HAT combines the power of Raspberry Pi computing with LEGO® hands-on learning to enable a fun and creative learning experience for students, teachers and makers.The Raspberry Pi Build HAT is an add-on board...

Mini Black HAT Hack3r – Fully AssembledNeed to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you! A nifty little tool that lets you access all of the GPIO pins while also running a HAT. Ideal for debugging your HAT projects or...

InnoMaker HiFi DAC Audio Hat for Raspberry Pi The HiFi DAC Hat compatible with Raspberry Pi Zero, Zero W, 3B, 3B+, Pi 4 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get...

Raspberry Pi PoE+ HAT - SC1022 - Works with Raspberry Pi 4 and Raspberry Pi 3B+ The Raspberry Pi PoE+ HAT adds Power-over-Ethernet functionality to your Raspberry Pi 4B or Pi 3 B+, delivering both data and power through a single cable. It...

Transform your Raspberry Pi Pico into a electronic adventure playground packed with physical computing goodies including an LCD screen, motor drivers, a mini breadboard, and much more! Pico Explorer lets you play with circuits, build science...

Built especially to showcase Raspberry Pi's low cost, feature-rich RP2040 chip, this board has VGA output, an SD card slot, digital I2S audio output, and more! Based on the reference design by Raspberry Pi our Pimoroni Pico VGA Demo Base is a great way...

What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The original version of this was a PCB, but I've now updated it to...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU. 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin header for...

Please note that due to supply shortages the acyrlic case stock for this product is now solid black instead of transparent black as shown in the product images. This is the VOLT+ With Stepped Attenuator. Includes VOLT+ Amp + Stepped Attenuator + Acrylic...

Waveshare 13890 - 1.3inch OLED Display HAT For Raspberry Pi, 128x64 Pixels, SPI/I2C Interface This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, with embedded controller, communicating via SPI or I2C interface...

Over one hundred RGB LEDs, all individually-controllable, and four tactile buttons. It's the ultimate pocket-sized rainbow generator for Raspberry Pi! Unicorn HAT Mini is a 17x7 matrix of RGB LEDs that can be controlled, both in terms of...

Waveshare 17372 - 4G/3G/2G/GSM/GPRS/GNSS HAT For Raspberry Pi, Based On SIM7600G-H - SIM7600G-H 4G HAT The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data...

The I2C multiplexer allows connecting multiple I2C devices with the same address onto a single I2C bus (PCB colour may vary). For each multiplexed output there are 4 pins - data ports SDAx, SCLx GND ground and V for power. The "V" output can be altered...

Waveshare 3965 - RS232 Communication Board, SP3232 On Board, 3V-5.5V, ESD Enhanced, Hardware Flow Control Supported The RS232 Board is used for establishing RS232 communication with devices powered from 3V - 5.5V. It contains SP3232 (RS-232...

Argon Fan HAT for Raspberry Pi 3B/3B+/4B – Active cooling with safe-shutdown button The Argon Fan HAT pairs a 40 mm cooling fan with a built‑in power button for safe shutdown, reboot, and forced-off functionality. It installs in a heartbeat using...