null
Toggle menu
Vertical Categories

* Raspberry Pi

Sub Categories

Raspberry Pi 5

Raspberry Pi 5

Raspberry Pi Accessories

Raspberry Pi Accessories

Raspberry Pi Arcade

Raspberry Pi Arcade

Raspberry Pi Boards

Raspberry Pi Boards

Raspberry Pi Cables

Raspberry Pi Cables

Raspberry Pi Cameras

Raspberry Pi Cameras

Raspberry Pi Cases

Raspberry Pi Cases

Raspberry Pi Cooling

Raspberry Pi Cooling

Raspberry Pi HATs and Add-On Boards

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Kits

Raspberry Pi Kits

Raspberry Pi Networking

Raspberry Pi Networking

Raspberry Pi Power Supplies

Raspberry Pi Power Supplies

Raspberry Pi Prototyping & GPIO

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens & Displays

Raspberry Pi Screens & Displays

Raspberry Pi Services

Raspberry Pi Services

Guides & Books

Guides & Books

Raspberry Pi SD Cards

Raspberry Pi SD Cards

Swag

Swag

Filter
View as:
Wireless-N 300Mbps USB WiFi Adapter – HX9500

Wireless-N 300Mbps USB WiFi Adapter – HX9500

$8.95
WARNING: This adapter requires installation of a third-party driver. Although it is relatively simple, PLEASE READ THE INSTALLATION INSTRUCTIONS and ensure you are comfortable following them before buying this adapter. Update the driver source from...
Add to Cart
FLIRC – RPi USB XBMC IR Remote Receiver

FLIRC – RPi USB XBMC IR Remote Receiver

$22.95
This is the NEW version of FLIRC. Learn more here. Flirc is a small USB device that plugs into your computer and pairs with your same television remote, or any remote that you want to use. It’s basically a universal IR receiver. The best part...
Add to Cart
HighPi Pro 5V Cooling Fan

HighPi Pro 5V Cooling Fan

$5.95
Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything...
Add to Cart
Pure Copper Heatsink for Raspberry Pi

Pure Copper Heatsink for Raspberry Pi

$1.95
Adhesive thermal layer Keep your Raspberry Pi cool with this heat sink Reduces the risk of hardware failure due to overheating Low profile, will fit into most cases Simple, passive cooling. no need for noisy fans Perfectly sized for the Pi's...
Add to Cart
UniPiCase Zero - HiFiBerry DAC+ Zero Case

UniPiCase Zero - HiFiBerry DAC+ Zero Case

$11.95
The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured here in Canada! This one is of many possible variations of this case. The UniPiCase ZW is incredibly...
Add to Cart
UniPiCase Zero - HiFiBerry MiniAmp Case

UniPiCase Zero - HiFiBerry MiniAmp Case

$11.95
The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured in Canada! This one is of many possible variations of this case. The UniPiCase ZW is incredibly...
Add to Cart
PiShop UniPiCase Zero Camera case with domed lid for Raspberry Pi Zero

UniPiCase Zero - Camera

$9.95
The PiShop UniPiCase Zero - Camera is a compact case designed for the Pi Zero. Its domed lid supports mounting of Official Raspberry Pi Cameras, with a slot for camera cables beneath the case. All ports remain accessible, while silicone feet and...
Add to Cart
Half-size 400-Pin DIY Breadboard, White

Half-size 400-Pin DIY Breadboard, White

$5.45
This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4"...
Add to Cart
Pi Zero USB Stem

Pi Zero USB Stem

$6.95
The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Zero Stem is compatible...
Add to Cart
Camera Cable Joiner/Extender for Raspberry Pi

Camera Cable Joiner/Extender for Raspberry Pi

$3.50
The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that’s simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as...
Add to Cart
Raspberry Pi 3 Model B+ top view with dual-band Wi-Fi and PoE capability

Raspberry Pi 3 Model B Plus (B+)

$40.00
Raspberry Pi 3 Model B+ | SC0073 | The final revision of the third-generation RPi single-board computer Released on Pi Day 2018, the Raspberry Pi 3 Model B Plus delivers a quad-core 1.4 GHz 64-bit processor, dual-band 2.4/5 GHz...
Choose Options
Butterfly PCB

Butterfly PCB

$2.95
Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40-pin header. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM), which have solder jumpers – this allows HATs which follow the specification correctly...
Add to Cart
Cluster HAT Kit (includes 4 x Raspberry Pi Zero W)

Cluster HAT Kit (includes 4 x Raspberry Pi Zero W)

$132.95 $140.70
The Cluster HAT is the perfect tool for modelling, testing and teaching small scale clusters. The Cluster HAT is designed to interface a controller (Raspberry Pi A+/B+/2/3/4) with 4 Raspberry Pi Zero's configured to use USB gadget mode.This Kit...
Choose Options
BeoCreate 4-Channel Amplifier

BeoCreate 4-Channel Amplifier

$199.95
The Beocreate is a joint project between audio legends Bang & Olufsen and HiFiBerry. It is a very flexible 4-Channel DSP/DAC/amplifier combination board designed for high-quality music playback in combination with passive...
Add to Cart
Cluster HAT v2.5 board with USB cable and mounting hardware for Raspberry Pi cluster setup.

Cluster HAT v2.5

$37.95
Cluster Hat Version 2.5 by 8086 Consultancy The Cluster HAT interfaces a (Controller) Raspberry Pi A+/B+/2/3/4 with up to 4 Raspberry Pi Zeros (1.1/1.2 or W) configured to use USB Gadget mode, and is an ideal tool for teaching or testing small-scale...
Choose Options
Brass Standoffs, M2.5 x 15mm, Package of 4

Brass Standoffs, M2.5 x 15mm, Package of 4

$3.45
Brass standoff kits ideal for Raspberry Pi, Arduino, and other electronics. These are ideal for Alchemy Power products such as Pi-EzConnect, Pi-16ADC, Pi-BB, and Pi-UpTime. Contents Eight brass M2.5 15mm x 6mm hex...
Add to Cart
UniPiCase - Zero Standard

UniPiCase - Zero Standard

$9.95
The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured here in Canada! Please note, this case is not compatible with the Zero WH. Only Tall versions of the case...
Add to Cart
list

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.