1 Piece Car USB LED Atmosphere Lights Decorative Lamp Emergency Lighting Universal PC Portable Plug and Play Red/Blue/White Features Play and plug Mini size, easy for usage Universal for cars/automobiles/PC/computer/Portable battery with USB...

Monitor air pollution cheaply and accurately with this matchbox-sized particulate matter (PM) sensor from Plantower! It senses particulates of various sizes (PM1, PM2.5, PM10) from sources like smoke, dust, pollen, metal and organic particles, and more...

A handy-dandy breakout that converts between the picoblade connector cable on the PMS5003 particulate matter sensor and a standard male 2.54mm pitch header. Use this breakout to connect a PMS5003 particulate matter sensor straight to your Raspberry Pi...

Pimoroni PIM575 - BME688 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity) The super-smart BME688 air quality sensor can measure temperature, pressure, and humidity precisely. It also has an upgraded, AI-enhanced gas scanner! Like...

A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure. It's Raspberry Pi and Arduino-compatible. We use this sensor on our Enviro+ environmental monitoring...

A tiny, RGBW-illuminated, clickable Trackball Breakout that's perfect for adding navigation or control to your Raspberry Pi or Arduino projects. We've taken a trackball module from everyone's favourite fruit-flavoured phone and added a bunch of clever...

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm. The LTR-559 is the same sort of sensor that you'd find next to the camera in your phone to detect when it's next...

A fast and precise environmental sensor that can measure temperature, pressure, and altitude. Our BMP280 breakout is Raspberry-Pi and Arduino-compatible. If you're looking for a simple temperature and pressure sensor, then this is the one to pick. It's...

Whether you're an agriculturalist, a professional meteorologist or a weather hobbyist, building your own weather station can be a really rewarding project. When you're measuring weather, however, you need some pretty specialized sensors. This kit...

L3G4200D is a 3 axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 degrees per second (dps).   The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and...

This potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will shift on its own. We like this one because...

Description LCD display module with blue backlight Wide viewing angle and high contrast Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, Raspberry Pi DIY Users LCM type:...

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped...

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards. They will work where "thick pin"...

0.91-inch White OLED Display Module (I2C Interface) The 0.91-inch White OLED Display Module (I2C Interface) is a compact screen ideal for adding clear visual output to microcontroller projects. With a 128×32 resolution and bright white pixels, it...

SparkFun Thumb Joystick Breakout BOB-09110 This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and include 4 mounting holes in the corners. Size: 1" x 1.25" Documents Schematic Eagle...

This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set on a...

Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! Inspired by Alex Ellis' work with his Raspberry Pi Zero Docker Cluster, Pimoroni developed these boards for...

By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer counter, which species rotation counts are not limited. With the buttons on the...

This rotary encoder is the best of the best, its a high quality 24-pulse encoder, with detents and a nice feel. It is panel mountable for placement in a box, or you can plug it into a breadboard (just cut/bend the two mechanical side tabs.) We also...