Flat 1M HDMI cable.

Caution! This switch is NOT compatible with the Raspberry Pi 4B. Please see the Type-C Power Switch for Raspberry Pi 4 instead. Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This...

We think this USB-A to micro-USB B cable is the perfect length, at 45cm/1.5ft. Black in color. This cable is male USB(A) to male micro-USB(B), USB 2.0. Compatible with micro:bit, Raspberry Pi (up to Pi 3B+) and many Arduino boards.

If you have a project where you’d like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm ‘free hanging’ cable assembly that latches strongly. One wire is marked with a white dashed line. You can’t plug...

If you have a project where you’d like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm ‘free hanging’ cable assembly that latches strongly. One wire is marked with a white dashed line. You can’t plug these in backwards. We...

Connect your Pi or any Blu-Ray player, Satellite Box, Cable Box, DVD Player, Media Player, or ANY device accepting the standard HDMI connector.

The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly improve the sound quality and volume...

40PCS Dupont Wire Color Jumper Cable，2.54mm Female to Female For Arduino

Designed with classrooms in mind, this 10-pack of color-coded alligator clips is ideal for STEM education, science labs, and hands-on electronics learning. These small test leads allow students to quickly connect circuits without soldering—perfect...

Multicolored / comes in a 40-pin separable ribbon cable Great for microcontroller experiment

Handy for making wire harnesses or jumpering between headers on PCB's These premium jumper wires are 20cm long and come in a 'strip' of 40 0.1" male header contacts on one end and 0.1" female header contacts on the other Fit cleanly next to each other on...

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Zero Stem is compatible...

PRO SIGNAL-RPUSB 1M-COMPUTER CABLE, USB A PLUG TO MICRO USB B PLUG, 1M, BLACK High quality standard A-miniB USB cable, for USB 1.1 or 2.0. Approximately 1M (3ft) long from end to end.

This camera cable is specifically designed to work with the Raspberry Pi Zero v1.3 and Zero W! Just plug it into your Pi Zero’s camera port and then the other end into one of the official Pi Cameras (V2, NoIR V1, NoIR V2) for photo & video joy.

This USB to Micro USB Cable with switch is 1.5m long and is the perfect hard on/off power switch for your Raspberr yPi. This cable can be using in conjunction with a USB mains charger such as an Ultra HQ USB Power Supply and it's made with...

A 50cm USB to Micro USB Cable.

This adapter converts an HDMI signal for display on a VGA monitor Convert digital HDMI to analog VGA + Audio with this adapter. Perfect for Raspberry Pi, PC, and laptop. Features: Product resolution up to 720P/ 1080i/ 1080P Product output...

Note: For compatibility with Raspberry Pi boards, this hub must be set to USB 1.0 speed. To do so, type the following command in the terminal; sudo nano /boot/cmdline.txt and add the following line to the file dwc_otg.speed=1 One can never have...

Fire resistant CL2-rated cable jacket Unbranded cable with no logos or brand markings Thinner conductors than most other passive cables at the same lengths 10.2Gbps data throughput 1080p resolution at 60Hz 4K resolution at 24Hz 3D video...

Connects any CAT6 application such as computer to hub, patch panel or wall jack. This 550MHz CAT6 PVC stranded patch cord meets TIA/EIA 568A specifications, and support all CAT6 and other high speed applications. It has stranded wires for added cable...