MonkMakes - SKU00104 - LED Arc - A NeoPixel Multicolor LED Arc This 10 LED, multi-color arc with pin header and ring connectors is designed to work with BBC micro:bit, Raspberry Pi Pico, ESP32 and Arduino. 10 individually controllable LEDs...

This board is designed to dock with a BBC micro:bit using the micro:bit's edge connector. The board is a true CO2 sensor that also measures temperature and relative humidity. Features Low power -- power directly from your micro:bit CO2 0-5000ppm,...

This board is designed to interface to a BBC micro:bit through ring connectors. The board is a true CO2 sensor that also measures temperature and relative humidity. Features Low power -- power directly from your micro:bit CO2 0-5000ppm, temperature...

Plug a servo meter with 5.4mm (0.1 inch) header socket in, and connect croc/alligator clips to the rings, so that you can easily connect a servomotor to a ring-based microcontroller, such as the BBC micro:bit, Adafruit Circuit Playground Express or...

Easy way to connect breadboard from micro:bit by using all new SB Components micro:bit Breadboard Breakout it allows you to connect or plug a BBC micro:bit into a standard 2.54 mm pitch breadboard. The micro:bit Breadboard Breakout PCB is designed to...

micro:bit Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard” on top,  a Programmable Buzzer, Two User button, on/off switch, power status LED, USB power port and dedicated 5V, 3v3, and GND pins at...

A capacitive moisture meter with temperature and relative humidity measurement. Compatible with micro:bit, Raspberry Pi, Arduino, Pico and most microcontroller boards. Monitor soil moisture, temperature and relative humidity measurement with the Plant...

The MonkMakes RGB LED for micro:bit can be used to make any colour by controlling the red green and blue levels. Handily mounted on a PCB it connects to the micro:bit using alligator clips. Resources Datasheet (PDF) Instructions (PDF) Hi Res Images...

The MonkMakes Switch for micro:bit is a solid-state (no moving parts) switch that allows an output of a micro:bit to turn things on and off. This board can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or...

An electronics kit for your BBC micro:bit 2. Build 7 great projects. Requires micro:bit V2 Build 7 great projects: Lighthouse Movement Alarm Color Mixer Anemometer Fan Speed Controller Clap Controller Fan Nightlight The kit...

USB A-Male to USB Micro-B Cable - 3ftPerfect for micro:bit and some Arduino boards!

USB 2.0 TO MICRO USB CABLE - A TO MICRO B - 6" (15 CM) - BLACK Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. SPECIFICATIONS Connector A: USB Type-A (4 pin) USB 2.0 Connector B: USB Micro-B (5...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 6" (15 cm) - Black Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B:...

Works with Micro:bit v1 and v2. The MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right. The board uses a 10kΩ linear variable resistor (pot) to output a voltage between 0 and 3V that can...

Works with Micro:bit v1 and v2. The MonkMakes Connector for micro:bit makes it super-easy to connect I2C, SPI and other devices to your micro:bit without losing the main connector rings. Unlike other connectors that are designed to break-out all the...

The MonkMakes Solar Experimenters Kit for micro:bit is a project kit that allows you to experiment with harvesting energy from the sun and other light sources. It consists of a solar panel to harvest the energy, a solar store that stores the harvested...

The micro:bit Breadboard Adapter is a breadboard pinboard based on the BBC micro:bit. It plugs directly into the breadboard and breaks out each of the micro:bit’s pins, This breadboard adapter consists 2 arrangements of 22 micro:bit pins...

The USB A-Male to USB Micro-B Cable - 6 inches is a compact link between standard USB A ports and Micro-USB devices. At just 15 cm long, it keeps setups neat with less cable clutter. Perfect for powering or programming boards that use Micro-USB,...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

Click Me to Download the Instructions for this kit. The Servo Kit for micro:bit makes it easy to connect up three servomotors from your micro:bit. Not only that, but the kit also comes with three servomotors and a battery box. Just add a micro:bit and...