Pimoroni

An all-in-one board for making battery powered contraptions that can move, (optionally) make noise, and talk to the internet! Inventor 2040 is a multi-talented board that does (almost) everything...

An all-in-one, Pico W powered industrial/automation controller with 2.4GHz wireless connectivity, relays and a plethora of inputs and outputs. Compatible with 6V to 40V systems Automation 2040 W is...

Tufty 2040 - Tufty Only - PIM624 A hackable, programmable badge with 2.4" (320 x 240) TFT LCD colour display, powered by Raspberry Pi RP2040 We've had a lot of requests for a LCD version of Badger...

A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040. In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD display to make a...

Pimoroni PIM532 - Breakout Garden for Raspberry Pi 400 & 500Now at right angles! An easy, solderless, swappable way to use breakouts with your Raspberry Pi 400/500 - just pop up to three Breakout...

A Raspberry Pi Pico is not included A sparkly matrix of over a hundred fantabulous RGB LEDs for all your rainbow needs and some handy buttons - sized perfectly for the Raspberry Pi Pico! Unicorn...

The perfect mounting solution for your Raspberry Pi! Simply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi either bare or in any of the...

Build the hexapod/robot arm/other articulated contraption of your dreams with this all-in-one RP2040 powered servo controller with current measurement, sensor headers and RGB LEDs. Servo 2040 is a...

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to...

A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with...

A top of the line Pirate-brand RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic, and debug connectors... and built-in LiPo charging! We adore the versatility and...

A versatile, mid-level robot learning platform for Raspberry Pi. Trilobot is a sturdy Raspberry Pi-based robot kit, designed with educational use in mind. It's straightforward to get started with,...

Crisp, high-res, with great viewing angles (IPS), this 1.3" square, 240x240 pixel, colour LCD will add some pizzazz to your Raspberry Pi or Arduino projects. The square form-factor of this display...

A top of the line Pirate-brand RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic and debug connectors... and built in LiPo charging! We adore the versatility and value...

A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old...

Raspberry Pi Pico and Pico Omnibus are not included A spacious 2.0" (320 x 240) IPS LCD display for Raspberry Pi Pico, with four buttons, an RGB LED and plenty of room for your Pico projects! This...

Raspberry Pi Pico is not included A conveniently sized, labelled proto-board add-on for your Raspberry Pi Pico, perfect for permanently attaching your custom circuits! With a 6x20 grid of 2.54mm...

A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. Note:...

A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious...

A meteorologically minded Raspberry Pi HAT designed to make hooking up weather sensors a breeze (or a squall, or a gale). Weather HAT is a tidy all-in-one solution for hooking up climate and...