Categories - PiShop.us

Sub Categories

Join SharedStreets in building and testing out their new tools for curb mapping! SharedStreets has been developing the CurbWheel, a new data collection tool, and workflow for surveying curb regulations. Using the wheel and accompanying phone app,...

Notify Me

10-button kit – Picade Plasma Kit - Illuminated Arcade Buttons

$64.95

Add technicolour brilliance to your Picade or Picade Console with these addressable RGB LED arcade buttons, available in a 10-button kit (all buttons). Swap out your Picade's arcade buttons for the crystal clear ones in this kit, pop one of the...

Add to Cart

Pimoroni Pi Zero W Starter Kit

$42.95

A great bundle of things you need to get up and running with the new Pi Zero W! Includes an SD card with operating system pre-loaded, a smart and colourful Pibow Zero W case, and even one of Pimoroni's lovely Blinkt! multicolour LED strips to take...

Notify Me

Enviro for Raspberry Pi – Enviro + Air Quality

$62.95

Monitor your world with Enviro + Air Quality for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. They're the perfect way to get started with citizen science...

Add to Cart

HyperPixel 4.0 - Hi-Res Display for Raspberry Pi - Touch

$63.95

A high-resolution, high-speed 4.0" TFT display for your Raspberry Pi with optional capacitive multi-touch! HyperPixel 4.0 is the perfect way to use your Pi without a bunch of cables or a bulky display. Design your own interface to control your project,...

Add to Cart

FadeCandy - Dithering USB-Controlled Driver for NeoPixels

$21.95 $24.95

A new collaboration between Adafruit & Micah from Scanlime, we are excited to introduce Fadecandy, a NeoPixel driver with built in dithering, that can be controlled over USB. Fadecandy is not just hardware! It is a kit of both hardware and...

Notify Me

Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit

$12.95

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so Adafruit called it a bonnet, you see?) It's the exact same size as a Raspberry...

Notify Me

Assembled Pi T-Cobbler Plus - GPIO Breakout for A+/B+/Pi2/Pi3/Pi4/Zero

$7.95

This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO...

Add to Cart

Resistor Kit - 1/4W (500 total)

$9.95

Resistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you're gonna have the resistor you need when you need it is to...

Add to Cart

NeoPixel Ring - 16 x 5050 RGB LED with Integrated Drivers

$9.95

Round and round and round they go! 16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to...

Notify Me

Circuit Playground Express - Base Kit

$29.95

It's the Circuit Playground Express Base Kit! It provides the few things you'll need to get started with the new Circuit Playground Express. This version of Circuit Playground is super powered, and will work with Microsoft...

Notify Me

Mini Thermal Receipt Printer Starter Pack

$61.95

Hit the ground running (and printing!) with this starter pack that includes a thermal printer and all the extras and save a few dollars while you're at it. Includes A mini thermal receipt printer - with cables and plastic mounting shims A roll...

Notify Me

Small alligator clip test lead set with 12 flexible color-coded wires, ideal for electronics testing, micro:bit, Raspberry Pi, Arduino, and breadboard projects.

Small Alligator Clip Test Lead (set of 12)

$4.45

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in...

Add to Cart

Rugged Metal Pushbutton - 16mm 6V RGB Momentary

$11.95

A full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. Simply drill a 16mm hole into any material up to 1/4" thick and you can fit these in place - there's even a rubber gasket to keep...

Add to Cart

Unicorn HAT HD

$39.95

Pimoroni has stepped up their LED game! Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT. High-definition rainbow goodness! You can still use it for all of the same things as the regular Unicorn HAT, but with 4 times as many...

Notify Me

Pibow Coupé 4 – Red

$11.95

The slim, hackable, and attractive case for the Raspberry Pi 4! Note: This Pibow Coupé is only compatible with the Raspberry Pi 4! If you want a Pibow Coupé for a Raspberry Pi 3 B+ or earlier then you should...

Add to Cart

Adafruit Feather nRF52 Bluefruit LE - nRF52832

$24.95

The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one Bluetooth Low Energy board, with a native-Bluetooth chip, the nRF52832! It's Adafruit's take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in...

Add to Cart

Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055

$34.95

If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The...

Add to Cart

Flex Cable for Raspberry Pi Camera - 200mm / 8"

$1.95

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This...

Add to Cart

STS-Pi - Build a Roving Robot!

$31.95

The Pimoroni STS-Pi - Build a Roving Robot! is now discontinued. It has been replaced with the Trilobot! 5.... 4.... 3.... 2.... 1.... Turn your Raspberry Pi into a spaceship! This robot chassis is designed to be used with...

Notify Me