Waveshare RP2350 1.8inch AMOLED Touch Display Development Board, 368×448
(No reviews yet)
Write a Review
| Brand | Waveshare |
| SKU: | 1407-1 |
| Condition: | New |
Waveshare 31295 - RP2350 1.8inch AMOLED Touch Display Development Board, 368×448 Pixels, QSPI Interface, Dual-core & Dual-architecture Design, Accelerometer And Gyroscope Sensor
Features
RP2350-Touch-AMOLED-1.8 is a high-performance, highly integrated MCU board designed by Waveshare. It features a compact size with an onboard 1.8inch AMOLED capacitive touch display, power management chip, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low-power audio codec chip and so on, making it easy to develop and integrate into products quickly.
- RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
- 520KB of SRAM, and 16MB onboard Flash memory
- Type-C connector for easier use
- Onboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color
- Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively
- Lithium battery recharge/discharge header, suitable for mobile applications
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- Adapting 5 × multi-function GPIO pins
- 2 × I2C, 1 × UART, 1 × 12-bit ADC, 5 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
AMOLED parameters
| Display Panel | AMOLED | Display Size | 1.8 inch |
|---|---|---|---|
| Resolution | 368 × 448 pixels | Display Colors | 16.7M |
| Brightness | 350 cd/㎡ | Contrast Ratio | 100000:1 |
| Communication Interface | QSPI | Driver IC | SH8601 |
| Touch | Supported | Touch IC | FT3168 |
What's On Board
- RP2350A
Dual-core and dual-architecture design, up to 150 MHz operating frequency - QMI8658
6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer - PCF85063
RTC chip - ES8311
Low power mono audio codec - AXP2101
Highly integrated power management IC - PWR button
for system power supply ON/OFF, supports custom functions - Type-C connector
for programming, USB 1.1 with device and host support - BOOT button
for device startup and function debugging - Speaker
- Backup battery pads
for connecting backup battery, ensuring RTC function during the replacement of the main battery - MX1.25 Lithium battery header
MX1.25 2P connector, for 3.7V Lithium battery (optional), supports charging and discharging. (To fit inside the case, a battery size of 3.85 × 24 × 28 mm is recommended) - Microphone
- TF card slot
- W25Q128JVSIQ
16MB NOR-Flash - NS4150B
Audio power amplifier
Pin Definition
Onboard multiple GPIO interfaces, more convenient for development, offers strong flexibility.
outline dimensions
Resources
Wiki: www.waveshare.com/wiki/RP2350-Touch-AMOLED-1.8
Package Content
- RP2350-Touch-AMOLED-1.8 x1
- 3.7V MX1.25 Lithium battery ×1