Pimoroni PIM730 - Add 2.4GHz wireless and Bluetooth functionality to an existing project with this handy breakout featuring Raspberry Pi's RM2 module. RM2 uses the same two-in-one wireless and Bluetooth module that's found on Raspberry Pi Pico...

This high performing LTE Swivel antenna comes with SMA-Male connector.  It is ground plane independent. Specifications Technology: 4G LTE, 3G, 2G Antenna Frequency: 698-960/1710-2170/2500-2700 MHz MHz VSWR: 1.7 :1 Mounting...

RF Interface cable 20 cm SMA/IPEX pigtail with SMA female bulkhead and U.FL connector. For most miniPCIe WWAN modules, RF 1.13 cable. Specs Connector Type: SMA-F, IPEX MHF/U.FL Cable Specification: 1.13 mm coax Cable length: 20...

The SIMCom SIM7600G-H R2 LTE CAT-4 mPCIe is Multi-Band LTE-TDD/LTE-FDD module solution in a mPCIe form factor. SIM7600G-H R2 is a LTE CAT4 module with support of up to 150Mbps downlink data transfer. With abundant application capability like...

USB to LoRa Dongle is a powerful and versatile USB to LoRa that lets you connect beyond boundaries. With its exceptional range and easy connectivity, it allows you to seamlessly communicate with devices up to 5 km away. LoRa Dongle is the perfect...

Introducing PiBeam, the ultimate USB IR Transceiver that revolutionizes the way you control your devices. Designed with convenience and versatility in mind, PiBeam supports all common remote control protocols, making it compatible with a wide range of...

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the buttons on your RF keyfob remote. When the A button is...

Please note that this is a kit consisting of both the Challenger RP2040 NFC board and a 13.56MHz NFC Antenna. The Challenger RP2040 NFC is a small embedded computer, equipped with an advanced on-board NFC controller (NXP PN7150), in the popular Adafruit...

This antenna is perfect for use together with our Lora as well as our SubGHz boards. It is a 43.5mm by 20mm flex PCB antenna with double sided tape on the backside making it perfect for mounting inside of an enclosure. It has been designed specifically...

Includes 2x DF13 6-pin to 2.54 mm female jumpers for UART and ADC ports 1x DF13 4-pin to 2.54 mm female jumpers for I2C port Wire length: 200 mm

Supports LiPo batteries up to 6S Max current sensing: 60 A* Switching regulator output: 5.3 V 2.25 A 6-pos DF13 cable for connection to Navio2 power port *power module can sense current up to 90A if different connectors are used (XT60 connectors...

This antenna is NOT compatible with NEO-6T USB dongle. Benefits Superior multipath signal rejection Great out-of-band signal rejection Excellent signal-to-noise ratio Consistent response in all op. temperatures Specifications Antenna type:...

Autopilot HAT for Raspberry Pi powered by ArduPilot and ROS Turn your Raspberry Pi® into a drone controller by using the might of sensors and controllers on board. Currently supported boards​ ArduPilot on Navio2 works on: Raspberry Pi 4 Model...

LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S and E22-400T22S SMA antenna connector, IPEX antenna connector, LoRa™ Spread...

Add both WiFi and Bluetooth capability to your computer super fast with this USB Bluetooth / WiFi Dongle! This little two-faced cutie is so versatile! Its WiFi half can be used to make Internet of Things devices cable-free or we also love to take...

External LTE-M Antenna Kit for use with the FiPy and GPy development boards. Specification Frequency: 703~803/2520~2620(MHz) Antenna size: 75 x 21 (mm) PCB 0.6 mm LTE Low bands (5, 8, 12, 13, 18, 19, 20, 28) Tx...

Meet our new Pygate case. It will fit your Pygate in perfectly. It’s a translucent smokey colour, made from a polycarbonate material. Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3...

Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3.0, LoPy4 and GPy and hook up any other Pycom devices and voila – a decentralised IoT network. NOTE: Just add a WiPy, LoPy4 or GPy to provide the processing...

This universal LoRa & Sigfox Antenna Kit can be used with the LoPy, SiPy, LoPy4 and FiPy IoT Development boards. The LoRa & Sigfox Antenna Kit Includes External antenna. RF Cable Assemblies RP-SMA (Female) JK-IPEX MHF U.FL 1.13 100MM RP-SMA...

WARNING: This adapter requires installation of a third-party driver. Although it is relatively simple, PLEASE READ THE INSTALLATION INSTRUCTIONS and ensure you are comfortable following them before buying this adapter. Update the driver source from...