Turn your Raspberry Pi into a retro games console! Picade X HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice! Picade X HAT is now Raspberry Pi 4 compatible, with USB-C power! This HAT has all the same great...

PiTalk - 4G IoT HAT - SKU25985PiTalk is a 4G cellular connectivity solution based on Quectel EG25-G LTE Cat 4 module intended for M2M and IoT applications, PiTalk supports data rates up to 150 Mbps downlink and 50 Mbps uplink, integrates GNSS support,...

Raspberry Pi Sense HAT V2 - SC0329 The Raspberry Pi Sense HAT V2 is the perfect product to learn about programming and how we interact with the world around us. With its full array of sensors, the Sense HAT was originally developed for use on the...

Waveshare 23285 - Power Over Ethernet HAT (E) For Raspberry Pi 3B+/4B, 802.3af-Compliant - PoE HAT (E) Features The PoE HAT (E) is a mini 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some...

PIM485 - Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a...

Raspberry Pi Board not Included The PiTraffic is a low-cost hardware Shield designed to allow Raspberry Pi users to take their first steps into interfacing with the real world. Designed with the learning in mind, everyone...

PiStack is an I/O expansion kit designed for Raspberry Pi, which provides 3 sets of 2x20 pin headers, which means a handy way to "stack" multi different HATs together, and use them as a specific combination/project. Features Standard Raspberry Pi...

A fully featured environmental monitoring / citizen science add-on for Raspberry Pi Pico and Pico W. It has a built-in colour 1.54" LCD screen and is jam-packed with sensors! Pico Enviro+ Pack measures just 61 x 31.5 mm, but we've filled it to the brim...

Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi Pico. Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi...

Pimoroni PIM532 - Breakout Garden for Raspberry Pi 400 & 500Now at right angles! An easy, solderless, swappable way to use breakouts with your Raspberry Pi 400/500 - just pop up to three Breakout Garden breakouts (2 x I2C, 1 x SPI) into the slots and...

A Raspberry Pi Pico is not included A sparkly matrix of over a hundred fantabulous RGB LEDs for all your rainbow needs and some handy buttons - sized perfectly for the Raspberry Pi Pico! Unicorn setup is resized so that it fits nicely on the back of...

Waveshare 16864 - Sense HAT (B) For Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors - Sense HAT (B) Raspberry Pi and external sensors are NOT included Overview The Sense HAT (B) is specially designed for Raspberry Pi,...

Monitor and analyze the air you breathe with the Kitronik Air Quality Board for the Raspberry Pi Pico. Great for home and in the classroom. The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for...

Maximum Compatibility The RPI ADC Hat is compatible with models 2B, 3B, 4B, zero w, w2 and even the 400. All GPIO pins are free for other uses. You can even add another hat first and add the RPI ADC hat on top.  What if there is no room in the...

Waveshare 19445 - Power Over Ethernet HAT (Type C) For Raspberry Pi 3B+/4B, 802.3af/at Power-Sourcing Equipment Required Features The PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small...

Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico. This Compact Robotics Board enables the Raspberry Pi Pico (connected via pin header) to drive 4 motors (or 2 stepper motors)...

Waveshare 20472 - USB 3.2 Gen1 And Gigabit Ethernet HUB HAT For Raspberry Pi, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free This is a driver-free 3 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more...

A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality. Raspberry Pi and accessories are NOT included. Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and...

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and...