HiFiBerry DSP Add-On Board - 4260439550743This DSP add-on board adds digital signal processing capabilities to the following HiFiBerry sound cards: DAC2 HD DAC2 Pro DAC2 ADC Pro Digi2 Pro & Digi2 Pro Rev2.2 Amp 100 Have a look...

The HiFiBerry DAC2 ADC Pro is a high-resolution digital-to-analog and analog-to-digital converter for the Raspberry Pi (newer models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi, optimised for one specific use case: the...

This new Digi2 is a revised version of the Digi+ model which is compatible with both the Pi4 rev. 1.5 and backwards. The new design features a second GPIO header that accommodates our add-on boards and has all the same features as our original model...

Power supply is not included The HiFiBerry AMP100 has been designed with more demanding speaker loads in mind. Just as with our other products, this new model features an improved signal path based on our DAC2 Pro section, but benefits from higher power...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and...

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The original version of this was a PCB, but I've now updated it to...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU. 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin header for...

The I2C multiplexer allows connecting multiple I2C devices with the same address onto a single I2C bus (PCB colour may vary). For each multiplexed output there are 4 pins - data ports SDAx, SCLx GND ground and V for power. The "V" output can be altered...

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B/Zero The HiFiBerry DAC2 HD is a high-end DAC for the Raspberry Pi. It can be simply plugged onto your Raspberry Pi, without any soldering. ADDITIONAL INFORMATION Weight 30 g Dimensions 5.5...

Our HiFiBerry DAC+ ADC combines HifiBerry's well-know DAC+ with an analogue input. Both input and output support sample rates up to 192kHz. Note that you might need to update your Linux kernel to support the audio input features (at least Raspberry...

If you are looking for a case for HiFiBerry DAC+,Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! HiFiBerry's best selling DAC with powerful onboard Digial Signal...

This is HifiBerry's smallest amplifier board, designed for the Raspberry Pi Zero. It can be used not only with the Raspberry Pi Zero, but also with the bigger Raspberry Pi B+/2 and 3.  Sometimes it just has to be small. For this use case...

Sometimes it just has to be small. For this use case HiFiBerry has build the DAC+ Zero, that fits perfectly onto a Raspberry Pi Zero. It does not have the advanced features as volume control, EEPROM, ultra-low-noise regulators, but still offers...

If you are looking for a case for HiFiBerry DAC+, Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! HiFiBerry DAC+ Light with a pair of RCA jacks. It can be simply...

HiFiBerry DAC+ with a single 3.5mm phone jack. Includes the Nylon spacer.The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi. This is a special sound card for the Raspberry Pi, that is optimized for one specific use...

If you are looking for a case for HiFiBerry DAC+,Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! The HiFiBerry DAC+ is a high-resolution digital-to-analog converter...

Dual Supply for Raspberry Pi (A+/B+/2B/3B/3B+) Power from each Micro USB connector goes via a MOSFET "Ideal Diode" which is then connected directly to the Micro USB socket on the Raspberry Pi. Data pins are not connected from either Micro USB port (as...

Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM) which have solder jumpers – this allows HAT which follow the specification correctly...

The Beocreate is a joint project between audio legends Bang & Olufsen and HiFiBerry. It is a very flexible 4-Channel DSP/DAC/amplifier combination board designed for high-quality music playback in combination with passive...