Raspberry Pi in US - Authorized Reseller

* Raspberry Pi

Sub Categories

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens & Displays

7" Touch Screen All-In-One Kit Designed for Raspberry Pi CM4, 5MP Camera, Aluminum Case

$189.95

Waveshare 21225 - 7" Touch Screen All-In-One Kit Designed For Raspberry Pi CM4, 5MP Camera, Aluminum Case - CM4-DISP-BASE-7A-BOX Specifications CM4 socket suitable for all variants of Compute Module 4 Networking Gigabit Ethernet...

Add to Cart

USB-C Adapter For M.2 SSD, USB3.2 Gen2 Type-C

$13.95

Waveshare 21358 - USB-C Adapter For NGFF M.2 SSD, USB3.2 Gen2 Type-C Note that this adapter is ONLY for SATA M.2 SSDs. NVMe IS NOT supported! Features M.2 NGFF Protocol Support High-speed Transfer USB-C Connector: Transforming Your M.2 SSD Into...

Notify Me

Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1

$6.95

Waveshare 21474 - Dual-Mode Bluetooth Module For Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1 Wireless Features The Pico-BLE is a dual-mode Bluetooth 5.1 expansion module designed for Raspberry Pi Pico, which is controlled via UART AT commands, with SPP...

Notify Me

GPIO Expansion Plate for Pi 2/3 - 26P

$1.95 $2.95

Raspberry Pi 3 GPIO Extension Board For Raspberry Pi 2/3 Model Board Version 2.1 26 pin

Add to Cart

Mini Wireless Keyboard Remote Rii MX6

$24.95

Double-sided Mutimedia Remote Controller with Air Mouse and Keyboard Auto connect through 2.4G wireless Keyboard+Air mouse+Infrared+Microphone 2.4G wireless mini QWERTY keyboard and touchpad combo. USB 2.0 receiver plug and play. 360 °...

Add to Cart

Inky Impression 4" (7 colour ePaper/eInk HAT)

$57.95

A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious crispness, impressive low power credentials and enticing...

Notify Me

Weather HAT (HAT only)

$45.95

A meteorologically minded Raspberry Pi HAT designed to make hooking up weather sensors a breeze (or a squall, or a gale). Weather HAT is a tidy all-in-one solution for hooking up climate and environmental sensors to a Raspberry Pi. It has a bright 1.54"...

Add to Cart

Breadboard-friendly SPDT Slide Switch

$0.95

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped...

Add to Cart

Breadboard-friendly 2.1mm DC barrel jack

$0.95

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards. They will work where "thick pin"...

Add to Cart

Breadboard trim potentiometer - 10K

$1.25

These are our favorite trimpots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing they plug into breadboards or perfboards with ease. This is the same pot that comes with our character LCDs and...

Add to Cart

HyperPixel 4.0 Square - Hi-Res Display for Raspberry Pi – Touch

$78.95

A uniquely square, high-resolution, high-speed, 4.0" display with optional touchscreen for Raspberry Pi – it's hip to be square! HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0—a crisp, brilliant IPS display,...

Notify Me

Pro Mini Camera Mount for Raspberry Pi Zero

$6.95

This is the Pro model of the Mini Camera Mount, which includes a longer base section designed to hold your Raspberry Pi Zero! Note: the camera is mounted upside down with this mount. Libcamera and some other purpose-built applications allow you to...

Notify Me

Dual microB USB Power Cable

$3.95

Want to use your new Official Raspberry Pi 7" Touchscreen Display but need to keep your GPIO pins free? This handy little cable is just what you need! We love the Raspberry Pi touchscreen but we hate to block up our GPIO! That's why we had these...

Add to Cart

Coupé Ninja - Pibow 3 A+ Coupé (for Raspberry Pi 3 A+)

$8.95

Pibow 3 A+ Coupé. The slim, hackable, and attractive case for the Raspberry Pi 3 A+. Features Compatible with Raspberry Pi 3 A+ Extra venting top and bottom, and a place for installing a heatsink if you really want to push your...

Notify Me

USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi, 3x USB, 1x Gigabit ETH, Driver-Free

$31.95

Waveshare 20472 - USB 3.2 Gen1 And Gigabit Ethernet HUB HAT For Raspberry Pi, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free This is a driver-free 3 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more...

Notify Me

Waveshare 20716 - 2.13inch Touch E-Paper E-Ink Display For Raspberry Pi Zero, 250×122 Pixels, with ABS Protection Case - 2.13inch Touch e-Paper HAT (with case)

2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case

$30.95

Waveshare 20716 - 2.13inch Touch E-Paper E-Ink Display For Raspberry Pi Zero, 250×122 Pixels, with ABS Protection Case - 2.13inch Touch e-Paper HAT (with case) Features 2.13" capacitive touch e-Paper display, 5-point touch, 250×122...

Add to Cart

7inch Capacitive Touch Display for Raspberry Pi, with 5MP Front Camera, 800×480, DSI

$76.95 $84.95

Waveshare 20806 - 7inch Capacitive Touch Display For Raspberry Pi, With 5MP Front Camera, 800×480, DSI Interface Device & System Support Raspberry Pi Supports Raspberry Pi OS, 5-points touch, driver free Supports Ubuntu, single point...

Add to Cart

2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi, Multi Protections

$54.95

Waveshare 17075 - 2-Channel Isolated CAN FD Expansion HAT For Raspberry Pi, CAN FD Support, Multi Onboard Protection Circuits Features The 2-CH CAN FD HAT is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with...

Notify Me

Brass Screw and Stand-off Set – M2.5 - 180 Pieces

$12.95

Specifications Material: Brass + Stainless steel; rust resistant, practical, and durable M2.5 hex Brass spacers: female to female brass spacers have 4 sizes of 6 mm, 10 mm, 15 mm, 20 mm, male to female spacers are 6 with 6 mm, 10 with 6 mm, 15...

Notify Me

Argon ONE M.2 Expansion Board

$20.00

Argon ONE M.2 Expansion Board extends support for M.2 SATA SSDs to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional...

Add to Cart

* Raspberry Pi

Sub Categories

Raspberry Pi 5

Raspberry Pi Accessories

Raspberry Pi Arcade

Raspberry Pi Boards

Raspberry Pi Cables

Raspberry Pi Cameras

Raspberry Pi Cases

Raspberry Pi Cooling

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Kits

Raspberry Pi Networking

Raspberry Pi Power Supplies

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens & Displays

Raspberry Pi SD Cards

Raspberry Pi Services

Guides & Books

Swag

7" Touch Screen All-In-One Kit Designed for Raspberry Pi CM4, 5MP Camera, Aluminum Case

USB-C Adapter For M.2 SSD, USB3.2 Gen2 Type-C

Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1

GPIO Expansion Plate for Pi 2/3 - 26P

Mini Wireless Keyboard Remote Rii MX6

Inky Impression 4" (7 colour ePaper/eInk HAT)

Weather HAT (HAT only)

Breadboard-friendly SPDT Slide Switch

Breadboard-friendly 2.1mm DC barrel jack

Breadboard trim potentiometer - 10K

HyperPixel 4.0 Square - Hi-Res Display for Raspberry Pi – Touch

Pro Mini Camera Mount for Raspberry Pi Zero

Dual microB USB Power Cable

Coupé Ninja - Pibow 3 A+ Coupé (for Raspberry Pi 3 A+)

USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi, 3x USB, 1x Gigabit ETH, Driver-Free

2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case

7inch Capacitive Touch Display for Raspberry Pi, with 5MP Front Camera, 800×480, DSI

2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi, Multi Protections

Brass Screw and Stand-off Set – M2.5 - 180 Pieces

Argon ONE M.2 Expansion Board