ELECFREAKS Cutebot is a rear-drive smart car driven by dual high speed motors. There are many on-board equipments on the Cutebot including ultrasonic sensor and distance sensor, two RGB LED headlights and clearance lamps on the bottom, two line-tracking...

Adjustable sensitivity Analog Photocell Brick allow you to adjust sensitivity of analog Photocel to get digital signal or set a trigger value. Characteristics The 3-pins ports is easy to plug and play. Specifications Item | Parameter :-: | :-:...

The MonkMakes RGB LED for micro:bit can be used to make any colour by controlling the red green and blue levels. Handily mounted on a PCB it connects to the micro:bit using alligator clips. Resources Datasheet (PDF) Instructions (PDF) Hi Res Images...

The MonkMakes Switch for micro:bit is a solid-state (no moving parts) switch that allows an output of a micro:bit to turn things on and off. This board can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or...

scroll:bit is a little display with a lot of pixels! Its 119 bright white LEDs are perfect for scrolling messages with your micro:bit, or for animations, graphs, and more! Just slot in your micro:bit, then code scroll:bit with the...

pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly. It's ideal for building small circuits on a breadboard, and for exploring what different...

Make your micro:bit sing with noise:bit! It's a tiny speaker that packs a fair bit of punch, and it's perfect for BLEEPS and BLOOPS! Just slot in your micro:bit, and use the sound generation blocks and code in Microsoft...

Control and monitor your world with automation:bit! It's tolerant of up to 24V, with analog and digital inputs, outputs, and a relay, so it's ideal for automating low-voltage systems in your home. Just slot in your micro:bit (sold...

An electronics kit for your BBC micro:bit 2. Build 7 great projects. Requires micro:bit V2 Build 7 great projects: Lighthouse Movement Alarm Color Mixer Anemometer Fan Speed Controller Clap Controller Fan Nightlight The kit...

This OLED display has a wide display area for the times you need to read longer data on a screen. It is easy to connect with I²C and only uses two data wires! There is a great tutorial on Adafruit Learn, follow the instructions for the 128x32 I2C...

USB A-Male to USB Micro-B Cable - 3ftPerfect for micro:bit and some Arduino boards!

USB 2.0 TO MICRO USB CABLE - A TO MICRO B - 6" (15 CM) - BLACK Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. SPECIFICATIONS Connector A: USB Type-A (4 pin) USB 2.0 Connector B: USB Micro-B (5...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 6" (15 cm) - Black Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B:...

Works with Micro:bit v1 and v2. The MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right. The board uses a 10kΩ linear variable resistor (pot) to output a voltage between 0 and 3V that can...

Works with Micro:bit v1 and v2. The MonkMakes Connector for micro:bit makes it super-easy to connect I2C, SPI and other devices to your micro:bit without losing the main connector rings. Unlike other connectors that are designed to break-out all the...

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces...

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces...

OCTOPUS PIR Sensor module is a type of electronic building block based on AM412 pyroelectric digital smart sensor. It can be used in sensing and detection of human or animal motion, sensing distance is about 4-5 meters...

The MonkMakes Solar Experimenters Kit for micro:bit is a project kit that allows you to experiment with harvesting energy from the sun and other light sources. It consists of a solar panel to harvest the energy, a solar store that stores the harvested...

The micro:bit Breadboard Adapter is a breadboard pinboard based on the BBC micro:bit. It plugs directly into the breadboard and breaks out each of the micro:bit’s pins, This breadboard adapter consists 2 arrangements of 22 micro:bit pins...