High quality construction with PVC cable sleeve and embossed logos. USB 2.0 data transfer rates up to 480Mb/s USB C Plug to USB Micro B Plug 0.3m Cable length Color: Black Includes Cable only Useful information and supporting...

Pack of 10 official flexible micro:bit holders and straps Each micro:bit wearable allows you to connect your micro:bit to your battery pack with the flexible holder, and attach it to your wrist, ankle or another object with the adjustable strap...

Official flexible micro:bit holder and strap Official micro:bit branded wearable that allows you to connect your micro:bit to your battery pack with the flexible holder, and attach it to your wrist, ankle or another object with the adjustable strap...

Official Battery Box for micro:bit, with switch, for 2x AAA batteries  Features Battery Box for two AAA batteries (not included)  JST connector compatible with all versions of Micro:Bit Convenient on/off switch Dimensions: 59mm x 25...

Official micro:bit branded USB cables that allow you to power and transfer data to your micro:bit. High quality construction with PVC cable sleeve and embossed logos. USB 2.0 data transfer rates up to 480Mb/s USB A Plug to USB Micro B Plug 0.3m...

Official micro:bit branded USB cables that allow you to power and transfer data to your micro:bit. High quality construction with PVC cable sleeve and embossed logos. USB 2.0 data transfer rates up to 480Mb/s USB A Plug to USB Micro B Plug 0.3m...

The BBC micro:bit v2 is a mini computer that has been designed to make the coding fun and easy to learn. The micro:bit Club is a kit containing 10 lots of bundles of 10 x micro:bit v2 boards as well as the essentials to get powered up and ready to...

BBC micro:bit V2 Go Kit - Bundles micro:bit V2 with essential accessories - MEFV22G The BBC micro:bit V2 Go Starter Kit is designed to help students and beginners start coding right away. It comes with the micro:bit V2 board, USB cable, battery...

BBC micro:bit V2 Single | MEFV22S | micro:bit V2 (Board Only) - Retail Pack The BBC micro:bit V2 is a pocket-sized computer that introduces you to how software and hardware work together. It has an LED light display, buttons, sensors, a speaker, a...

The Water Sensor Provides a variable analog reading depending on how wet/damp the sensor is. Good for plants or fingers. The black lead goes on GND, the red lead goes on 3v and the blue lead goes on whichever pin is being used in the program. This...

A transistor that will allow other items to be switched where the micro:bit would not be able to. Items such as motors, larger speakers, relays and so forth, up to 1A total load. A current limiting resistor is in the circuit to protect the micro:bit...

A very accurate temperature sensor using a calibrated chip called a TMP36GZ. It is accurate to ±1°C at +25°C. At this temperature it outputs 750mV. It changes by 10mV per °C. The black lead goes on GND, the red lead...

A small microphone with amplifier & threshold setting. It can detect when sound reaches a certain level. It can not detect a particular frequency and there is no support in the micro:bit programming environment at present for it to analyse...

A 3V Light Emitting Diode as an additional LED. It uses a high brightness low current LED and includes a current limiting resistor to protect the micro:bit’s output. The black lead goes on to GND and the green lead goes on to whichever Pin 0, 1...

A pushbutton on a lead for when you need another pushbutton or you want it away from your micro:bit One lead goes on 3v or GND and the other lead goes on 0, 1, or 2. For advanced applications it is feasible to connect two pins with the pushbutton. It...

Provides a variable voltage to an analog input via a twist knob – a volume control if you will. Can be used for any application where a user input across an analog range is required – for instance changing the frequency of the music output or...

A type of buzzer – it has to be driven by a pulsed output. It’s tuned for around 2kHz when it will be at its loudest but will produce a tone across a wide range of frequencies. In the Block Editor, the black lead goes on to GND and the blue...

Description A small version of the PIR that is used in a typical burglar alarm. It triggers when a warm body passes in front of the detector. It has some range / sensitivity setting capability and the duration of the output can be set. The black lead...

Good for detecting boxes, drawers or doors being opened and much more. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is somewhat polarity sensitive, the red & black leads need...

An external light sensor for all your light sensing needs. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is polarity sensitive, the red & black leads need to be on the correct...