DIY HDMI Cable Parts - 10 cm HDMI Ribbon Cable
If you're looking to make a custom cable with any two of Adafruit's HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the HDMI adapters on each end using the flex cable clips. There are options a-plenty!
This is the 10 cm (~4 inches) version.
The two required HDMI adapters are not included!
Adafruit tested out these DIY cable kits with a Raspberry Pi at 1080P and they worked great but note that they are not going to be as durable or shielded as ready-made cables.
- Cable Length: 100mm
- Cable Width: 10mm / 0.4"
- Weight: 0.6g