Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23.5 mm tall: when placed on your Pi, a PCB will clear the...

External Programming Cable OR RPi Serial Console Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you...

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero. Little brother to ProtoDock, ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for...

The ProtoDock is an all-in-one desktop prototyping dock for your Raspberry Pi 4, Raspberry Pi 3 or any other 40-pin Model B Raspberry Pi! Similar to its little brother the ZeroDock, the ProtoDock keeps your desk tidy and all of your vital...

Allows four HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected, ID_SD and ID_SC (HAT EEPROM) have cuttable solder jumpers. For HAT/pHAT with an EEPROM (required by the HAT specification) you will...

Stack on top of your official POE HAT with this custom-made extra-tall 2 x 2 pin female header and 2 x 20 pin female header. This is a set of two headers which allows you to stack a POE HAT and another HAT on top of your Raspberry Pi This is...

Color Coded Header for Raspberry Pi - Easy Pin Identification The Color Coded Header for Raspberry Pi Zero and Zero W makes GPIO pinouts easy to follow. Each of the 40 pins is marked with a color for fast identification. Red is 5V, yellow is 3V, black...

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO...

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in...

GPIO Hammer Header (Solderless) – Male Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or...

The perfect Raspberry Pi stocking filler this Christmas! The Christmas Tree solder kit is the designed for any maker or hacker and an ideal kit for people new to Raspberry Pi or even the experienced users who want to practice the art of soldering! The...

A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold separately) Includes 1x Solderless Prototype Breadboard...

Hey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and you'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo, this buzzer does not need an AC signal. Inside is a piezo plus the driver circuitry that...

Bright RGB LED with built-in resistors Female header leads Plug directly into the GPIO pins of a Raspberry Pi The Monk Makes Squid RGB LED for Raspberry Pi is a bright RGB (Red, Green, Blue) LED with built-in resistors and female header...

This kit includes 2 servo motors and a Monk Makes ServoSix interface board for use with Raspberry Pi. It also includes a Raspberry Leaf GPIO template, a bunch of 10 female-to-female header pins and a 4xAA battery box Resources Instructions (PDF) Hi...

The MonkMakes Project Box 1 for Raspberry Pi is a complete electronics starter kit designed for easy hands-on learning. It replaces the original Electronic Starter Kit with updated components and clearer guidance. The kit includes all parts needed for 10...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

Connect your own PCB to a Raspberry Pi with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with...

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! SPECIFICATIONS Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation: Straight DIMENSIONS Overall Height: 11.2 mm Exposed...

Connect your own PCB to a Raspberry Pi and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra...