UniPiCase Zero - HiFiBerry DAC+ Zero Case $11.95 The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured here in Canada! This one is of many possible variations of this case. The UniPiCase ZW is incredibly... Add to Cart
UniPiCase Zero - HiFiBerry MiniAmp Case $11.95 The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured in Canada! This one is of many possible variations of this case. The UniPiCase ZW is incredibly... Add to Cart
UniPiCase Zero - Camera $9.95 The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured in Canada! This case is not compatible with Raspberry Pi Camera V3. However, you can easily enlarge the... Add to Cart
Half-size 400-Pin DIY Breadboard, White $5.45 This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4"... Add to Cart
BitScope Blade Uno PI $39.95 $49.95 Uno Pi is a BitScope Blade designed to power and mount one Raspberry Pi and optional HAT. Uno Pi can also power and mount the Raspberry Pi Display. It's perfect for building industrial strength stand-alone physical computing solutions... Add to Cart
Pi Zero USB Stem $6.95 The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Zero Stem is compatible... Add to Cart
Camera Cable Joiner/Extender for Raspberry Pi $3.50 The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that’s simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as... Add to Cart
Raspberry Pi 3 - Model B Plus (B+) $38.50 Important: If this is your first Pi or you are buying it as a gift please check this page. The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster... Choose Options
Butterfly PCB $2.95 Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM) which have solder jumpers – this allows HAT which follow the specification correctly... Add to Cart
BeoCreate 4-Channel Amplifier $199.95 The Beocreate is a joint project between audio legends Bang & Olufsen and HiFiBerry. It is a very flexible 4-Channel DSP/DAC/amplifier combination board designed for high-quality music playback in combination with passive... Add to Cart
Brass Standoffs, M2.5 x 15mm, Package of 4 $3.45 Brass standoff kits ideal for Raspberry Pi, Arduino, and other electronics. These are ideal for Alchemy Power products such as Pi-EzConnect, Pi-16ADC, Pi-BB, and Pi-UpTime. Contents Eight brass M2.5 15mm x 6mm hex... Add to Cart
UniPiCase - Zero Standard $9.95 The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured here in Canada! Please note, this case is not compatible with the Zero WH. Only Tall versions of the case... Add to Cart
Raspberry Pi Zero Wireless WH (Pre-Soldered Header) $16.00 No fiddly soldering required! Jump straight into your project with this Raspberry Pi Zero Wireless with a lovingly pre-soldered 40 Pin Male GPIO Header! The Brand New Raspberry Pi Zero Wireless has landed at PiShop.us! The... Choose Options
USB A Plug To Micro B PLUG, 1m(3ft), BLACK $1.95 PRO SIGNAL-RPUSB 1M-COMPUTER CABLE, USB A PLUG TO MICRO USB B PLUG, 1M, BLACK High quality standard A-miniB USB cable, for USB 1.1 or 2.0. Approximately 1M (3ft) long from end to end. Add to Cart
Aluminum Heatsink for Raspberry Pi B+/2/3 (2-Pack) $2.45 Heatsink 1: Size: 14 x 14 x 6mm Baseboard thickness: 1.0mm Fin thickness: 0.7mm Fin number: 7 pieces Fin space width: 1.5mm Heatsink 2: Size: 9 x 9 x 4mm Baseboard thickness: 1.0mm Fin thickness: 0.9mm Fin number: 5 pieces Fin space... Add to Cart
Male to Female Standoffs for Raspberry Pi (4-Pack) $2.45 Details: Can be also used to space circuit boards, panels, doors or gears Also known as standoff separator Dimensions : Depth = 5mm Height = 18mm Width = 5mm Weight = 1.4g Thread size (internal/external) = M3 Add to Cart
MicroSD Card - 64 GB - Class 10 - BLANK $9.95 This is a blank (empty) 64 GB - Class 10 (UHS-1) - microSD card (SanDisk, Kingston or another top brand). Does not come with adapter. Compatible with Models A/B/A+/B+/2/3 Add to Cart
MicroSD Card - 32 GB - Class 10 - BLANK $7.95 This is a blank (empty) 32 GB - Class 10 (UHS-1) - microSD card (SanDisk, Kingston or another top brand). Does not come with adapter. Compatible with Models A/B/A+/B+/2/3 Add to Cart
Raspberry Pi Zero Mini Camera Cable - 38mm $2.95 This camera cable is specifically designed to work with the Raspberry Pi Zero v1.3 and Zero W! Just plug it into your Pi Zero’s camera port and then the other end into one of the official Pi Cameras (V2, NoIR V1, NoIR V2) for photo & video joy. Add to Cart