If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable...

USB Type-C to USB 3.0 A-Male Cable - 1FT (30cm) - Black This USB-C to USB 3.0 cable lets you connect and charge your USB-C devices (hard drive, mobile, etc...) to a USB Type-A port on a computer, charger or tablet. Specifications Connector...

A 15cm extension cable for a microSD card. Insert your microSD card into one end and then connect the other end to your Pi / PC / anything with a microSD socket and voila, you're connected! Resources Dimensional drawing

Allo DC 5.5 X 2.1mm Input to Type C Output & DC 5.5 X 2.1mm Input to MicroUSB Output

Right Angle USB cable - A/MicroB This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a...

These three wire JST-SH to DuPont cables let you use the debug port of your Pimoroni Pico board for easy, solderless SWD programming. These cables are available with a choice of male or female DuPont (jumper wire) ends - you'll need the male version if...

These three wire JST-SH to DuPont cables let you use the debug port of your Pimoroni Pico board for easy, solderless SWD programming. These cables are available with a choice of male or female DuPont (jumper wire) ends - you'll need the male...

Multifunctional USB Power Meter - LCD Color Display - USB / Micro USB / USB-C A handy tool that measures voltage, current, power, charge time, and more for all of your USB A, Micro B, and USB C gadgets (phones, power banks, etc.....

A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. Note: this cable can be used with older models of HyperPixel 4...

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and...

This USB In-Line Voltage and Current Meter with OLED Display is a lot like the Charger Doctor we carry - if the doctor was a talented surgeon who just lost her medical license and has nothing to lose.  Just like the charger doctor, you can use this...

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards. They will work where "thick pin"...

USB A-Male to USB Micro-B Cable - 3ftPerfect for micro:bit and some Arduino boards!

USB 2.0 TO MICRO USB CABLE - A TO MICRO B - 6" (15 CM) - BLACK Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. SPECIFICATIONS Connector A: USB Type-A (4 pin) USB 2.0 Connector B: USB Micro-B (5...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 3FT (1m) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B: Right Angle...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 1.5FT (45 cm) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B: Right Angle...

Connect Pi Zero and standard Raspberry Pi cables/cameras. The adaptor can be used to connect Pi Zero camera with integral (with 22-pin/0.5mm pitch) cable to full sized Raspberry Pi. Or with a 22 pin 0.5mm pitch cable you can connect up a Pi Zero to a...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 6" (15 cm) - Black Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B:...

Power two devices from a single micro USB supply. Connects power from a single Micro USB connector to the Dual Female USB Type A connector. Micro USB data lines are connected to the lower USB port. Please Note: FOR USE ONLY WITH 5 VOLT supplies and...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of our HDMI adapters on each end using the flex cable clips...