USB TO RS232 / RS485 / TTL Industrial Isolated Converter $27.95 Waveshare 15817 - USB To RS232/485/TTL Interface Converter, Industrial Isolation This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical... Add to Cart
12 in 1 - USB Digital Tester & Adapter $16.95 Multifunctional USB Power Meter - LCD Color Display - USB / Micro USB / USB-C A handy tool that measures voltage, current, power, charge time, and more for all of your USB A, Micro B, and USB C gadgets (phones, power banks, etc..... Notify Me
HyperPixel 4.0 I2C Cable (JST-PH to male DuPont) $2.95 A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. Note: this cable can be used with older models of HyperPixel 4... Add to Cart
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long $1.45 This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and... Add to Cart
USB-C Adapter For M.2 SSD, USB3.2 Gen2 Type-C $13.95 Waveshare 21358 - USB-C Adapter For NGFF M.2 SSD, USB3.2 Gen2 Type-C Note that this adapter is ONLY for SATA M.2 SSDs. NVMe IS NOT supported! Features M.2 NGFF Protocol Support High-speed Transfer USB-C Connector: Transforming Your M.2 SSD Into... Add to Cart
Breadboard-friendly 2.1mm DC barrel jack $0.95 This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards. They will work where "thick pin"... Add to Cart
Dual microB USB Power Cable $3.95 Want to use your new Official Raspberry Pi 7" Touchscreen Display but need to keep your GPIO pins free? This handy little cable is just what you need! We love the Raspberry Pi touchscreen but we hate to block up our GPIO! That's why we had these... Add to Cart
USB A-Male to USB Micro-B Cable - 3ft $2.95 USB A-Male to USB Micro-B Cable - 3ftPerfect for micro:bit and some Arduino boards! Add to Cart
USB 2.0 A MALE TO MICRO B MALE CABLE, 6 INCH $2.95 USB 2.0 TO MICRO USB CABLE - A TO MICRO B - 6" (15 CM) - BLACK Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. SPECIFICATIONS Connector A: USB Type-A (4 pin) USB 2.0 Connector B: USB Micro-B (5... Add to Cart
USB 2.0 A MALE TO L-SHAPE MICRO B MALE CABLE, 3FT $2.95 $3.95 USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 3FT (1m) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B: Right Angle... Add to Cart
USB 2.0 A MALE TO L-SHAPE MICRO B MALE CABLE, 1.5FT $3.45 USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 1.5FT (45 cm) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B: Right Angle... Add to Cart
Zero Camera Cable Adaptor for Raspberry Pi $3.95 Connect Pi Zero and standard Raspberry Pi cables/cameras. The adaptor can be used to connect Pi Zero camera with integral (with 22-pin/0.5mm pitch) cable to full sized Raspberry Pi. Or with a 22 pin 0.5mm pitch cable you can connect up a Pi Zero to a... Add to Cart
USB 2.0 A MALE TO L-SHAPE MICRO B MALE CABLE, 6INCH $2.95 USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 6" (15 cm) - Black Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B:... Add to Cart
USB Power Splitter $2.95 Power two devices from a single micro USB supply. Connects power from a single Micro USB connector to the Dual Female USB Type A connector. Micro USB data lines are connected to the lower USB port. Please Note: FOR USE ONLY WITH 5 VOLT supplies and... Add to Cart
DIY HDMI Cable Parts - Right Angle (L Bend) Micro HDMI Plug $5.95 If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of our HDMI adapters on each end using the flex cable clips... Add to Cart
DIY HDMI Cable Parts - Straight HDMI Plug Adapter $5.95 If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of Adafruit's HDMI adapters on each end using the flex cable... Add to Cart
JST to Breadboard Jumper (3-pin) $1.95 This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based... Add to Cart
6ft 3.5mm Stereo Plug/2 RCA Plug Cable, Black $6.95 While most mobile devices use the 3.5mm stereo headphone output, most home audio systems with an amplifier or receiver use RCA jacks for audio inputs. This cable is ideal for connecting the output of your mp3 player or phone to your home audio system. It... Add to Cart
Micro HDMI Male to HDMI Female Adapter Cable $2.95 Micro HDMI Male to HDMI Female Adapter Cable. Note: Does NOT support HDMI CEC. Add to Cart