Categories - PiShop.us

Sub Categories

Flex Cable for Raspberry Pi Camera - 300mm / 12"

$2.45

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 300mm...

Add to Cart

Rugged Metal On/Off Switch with Blue LED Ring 16mm chrome-plated push button for enclosures.

Rugged Metal On/Off Switch with Blue LED Ring - 16mm Blue On/Off

$5.45

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of...

Add to Cart

Buzzer 5V - Breadboard Friendly

$0.95

Hey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and you'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo, this buzzer does not need an AC signal. Inside is a piezo plus the driver circuitry that...

Add to Cart

Arduino Compatible Sensor Shield V5.0 Expansion Board

$4.95

This is an Arduino Uno compatible sensor shield that allows you to plug sensor modules into the Arduino through the shield just like Lego blocks. The board has different pin groupings for the different types of connections that it supports. The last...

Notify Me

Jeff Probe

$15.95

FLIRC - Jeff Probe - Open Source JTAG probe Jeff Probe is an open source JTAG probe based entirely on the popular black magic probe. We needed a cost-effective solution for in-house debugging, the ability for customization, and something we can...

Add to Cart

SecurePi Case for Raspberry Pi 4

$9.95

All-new case that designed from the ground up for the Pi 4. You can learn more about the case and the design process here. The SecurePi Case was designed to work with the Pi 4. With optional SD and USB/Ethernet/HDMI covers...

Add to Cart

USB 2.0 Extension Cable - A-Male to A-Female, 6in

$1.45

USB Cable - 6 Inch USB Cord with USB A to A Cable, black Short extension USB cable provides a convenient way to connect a USB device with a fixed USB output, using the extension from the USB port of the computer, allowing the USB device to easily...

Add to Cart

Type-C Power Switch for Raspberry Pi 4

$4.95

USB-C Type-C USB Raspberry Pi Power Switch for Raspberry Pi 4 Model BOne Switch On/Off Power with Dramatically Reduces Wear and Tear on Sensitive USB-C Connectors. No need to pull the cable to restart or reboot your devices, just press the button to...

Add to Cart

Large Heatsink for Raspberry Pi 4 - Random Color

$3.49

This large (40x30x5mm) heatsink will let you eek out some extra thermal performance from power-hungry tasks. This XL heatsink is specifically designed for the Raspberry Pi 4. It will also fit most cases. It's just 5mm tall, so it should work with...

Add to Cart

Dual Fan for Raspberry Pi

$5.95

Dual Fan for Raspberry Pi delivers effective cooling for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+ with a compact heatsink topped with two fans. The installation is easy; thermal tape comes pre-applied. It spins at a zippy 7,500 rpm to keep...

Add to Cart

Armor Case with Dual Fan for Raspberry Pi 4 Model B - Black

$12.95

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for the Raspberry Pi 4B. This heat sink casing will provide...

Add to Cart

Armor Case Passive Cooling for Raspberry Pi 4 Model B - Black

$11.95

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case designed for the Raspberry Pi 4B. This heat sink casing will provide comprehensive...

Add to Cart

Aluminum Heatsink for Raspberry Pi 4B (3-Pack)

$2.95

Features Set of 3 Aluminum heat sinks Compatible with the Raspberry Pi 4 Model B board 3M 8810 adhesive thermal tape on the back Can be used with any other devices Reduce chip hot-spots and increase thermal dissipation surface...

Add to Cart

ModMyPi Modular RPi 2 Case - Spacer Screw Pack (58mm)

$0.45

THIS ITEM IS A PACK OF 4 x 58mm M3 SCREWS SUITABLE FOR FIXING 2 SPACER PLATE ON THE MODULAR RASPBERRY PI CASE Spacers increase the internal height of ModMyPi's Modular Raspberry Pi Case by 10mm per spacer, and can be stacked to increase...

Add to Cart

Micro-USB Power Supply, 5V 2.5A White - EURO PLUG

$6.95 $8.95

This Micro-USB power supply is top quality, and extensively tested for use with Raspberry Pi boards. The Micro-USB connection fits all Zero/2/3 models. Specifications Input voltage 100-240V Output 5V 2.5A North American plug type 3ft (1m) high...

Notify Me

Female Header Cable for Pi-UpTime-UPS, PiZ-UpTime & Tiny-UPS

$2.00

2.54mm (0.1") female header with 20 cm or ~7.8 inches cable for connecting switches and other peripherals to devices such as Tiny-UPS, Pi-UpTime-UPS, PiZ-UpTime or other devices. Specifications Single 1×2 female connector, 2.54 mm or 100 mil...

Add to Cart

SunFounder Da Vinci kit - 30 Projects Included

$49.95

Description SunFounder Da Vinci kit applies to the Raspberry Pi 4 Model B, 3 Model A+, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+, 1 Model A+, zero W and zero. It includes various components and chips that can help to create various interesting...

Add to Cart

SunFounder PiCar-V Kit V2.0 for Raspberry Pi

$95.95

The PiCar-V is an open-source robot learning kit based on Raspberry Pi 4B. Equipped with a wide-angle USB webcam, it is powerful together with three whole new circuit boards and less but simpler wiring. The PiCar-V is an open source robot...

Notify Me

SunFounder PiCar-S Kit V2.0 for Raspberry Pi

$94.95

The Picar-S is a cool smart sensor car that can work with Raspberry Pi 4 Model B, 3 Model B+/B, 2 Model B, Model B+. With three sensor modules including ultrasonic obstacle avoidance, light follower, and line follower, you can...

Notify Me