Cableshop.ca

USB A-Male to USB Micro-B Cable - 3ftPerfect for micro:bit and some Arduino boards!

USB 2.0 TO MICRO USB CABLE - A TO MICRO B - 6" (15 CM) - BLACK Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable. SPECIFICATIONS Connector...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 3FT (1m) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this cable. Specifications Connector A: USB Type-A (4...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 1.5FT (45 cm) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this cable. Specifications Connector A: USB...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 6" (15 cm) - Black Power your Raspberry Pi 3/Pico/Zero, Micro:bit, or any Micro-B USB devices with this mini cable...

HDMI Cable, Gold Plated - 3ft

Micro HDMI Male to HDMI Female Adapter Cable. Note: Does NOT support HDMI CEC.

Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 10ft, Black Save the time and hassle of building Ethernet cables by using these fixed-length UTP Cat6...

USB 3.0 SuperSpeed adapters are a great way to quickly change the connection type or gender of an existing USB cable. This adapter has USB Type C Male opposite USB 3.0 Type A Female...

USB Type-C to USB 3.0 A-Male Cable - 5FT

USB Type-C to USB 2.0 A-Male Cable - 5ft

USB Type-C to USB 2.0 A-Male Cable - 3ft

HDMI Cable, Gold Plated - 6ft

This 3 ft cable connects from microHDMI to full sized HDMI. It's a perfect fit for the Raspberry Pi 4 or 5, which features microHDMI ports.

Cat6 Ethernet Network Patch Cable RJ45 - 3ft

USB Type-C to USB 2.0 Micro-B Adapter This adapter allows you to connect and charge your USB Type-C devices to a USB host or power supply using a standard Micro-USB Cable. NOT recommended to...

USB Type-C to USB 2.0 Micro-B Cable - 3FT

USB Type-C to USB 3.0 A-Male Cable - 3FT (1m) - Black This USB-C to USB 3.0 cable lets you connect and charge your USB-C devices (hard drive, mobile, etc...) to a USB Type-A port on a computer,...

3.5mm 4 Conductor TRRS Male to 3RCA Female, Nickel Plated, 6in.This A/V RCA Cable for Raspberry Pi is a great way to turn your Pi 4, 3, 2, A+ or B+'s output into a full composite video and audio...

Length: 15 cm or 6 inches approximately