Robotics Board for Raspberry Pi Pico $18.95 Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico. This Compact Robotics Board enables the Raspberry Pi Pico (connected via pin header) to drive 4 motors (or 2 stepper motors)... Add to Cart
ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol $11.95 Waveshare 20182 - ESP8266 WiFi Module For Raspberry Pi Pico, Supports TCP/UDP Protocol Features The Pico-ESP8266 is a WiFi expansion module designed for Raspberry Pi Pico, which can be controlled via UART AT command, and supports TCP/UDP communication... Notify Me
Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1 $6.95 Waveshare 21474 - Dual-Mode Bluetooth Module For Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1 Wireless Features The Pico-BLE is a dual-mode Bluetooth 5.1 expansion module designed for Raspberry Pi Pico, which is controlled via UART AT commands, with SPP... Add to Cart
Inky Impression 4" (7 colour ePaper/eInk HAT) $54.95 A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious crispness, impressive low power credentials and enticing... Add to Cart
Weather HAT (HAT only) $42.95 A meteorologically minded Raspberry Pi HAT designed to make hooking up weather sensors a breeze (or a squall, or a gale). Weather HAT is a tidy all-in-one solution for hooking up climate and environmental sensors to a Raspberry Pi. It has a bright 1.54"... Add to Cart
296×128, 2.9inch flexible E-Ink display HAT for Raspberry Pi $23.95 Waveshare 16565 - 296×128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, black/white dual-color, SPI interface This is a flexible E-Ink display HAT for Raspberry Pi, 2.9inch, 296×128 resolution, with embedded controller,... Notify Me
USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi, 3x USB, 1x Gigabit ETH, Driver-Free $31.95 Waveshare 20472 - USB 3.2 Gen1 And Gigabit Ethernet HUB HAT For Raspberry Pi, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free This is a driver-free 3 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more... Notify Me
2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi, Multi Protections $68.95 Waveshare 17075 - 2-Channel Isolated CAN FD Expansion HAT For Raspberry Pi, CAN FD Support, Multi Onboard Protection Circuits Features The 2-CH CAN FD HAT is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with... Add to Cart
GFX HAT - 128x64 LCD Display with RGB Backlight and Touch Buttons $15.95 $19.95 A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off Pimoroni's beloved Display-O-Tron HAT, but gives... Notify Me
Skywriter HAT $14.95 $21.95 Use this 3D interface to sense things floating in the air over it. Detect swipes and the motion of your hand with X, Y and Z positions. Skywriter HAT uses electrical near-field 3D sensing to generate positional data and detect common gestures like... Notify Me
Display HAT Mini $22.95 A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality. Raspberry Pi and accessories are NOT included. Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and... Add to Cart
OnOff SHIM (micro-USB) $8.95 Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted... Add to Cart
Skywriter: 3D Gesture Sensing Breakout $21.95 $25.95 The big brother to the Skywriter HAT - Skywriter adds 3D gesture sensing to your project! Using Pimoroni's Python and Arduino libraries you can read off the positional data (x, y, z) and common gestures like flick left, tap,... Add to Cart
Touch pHAT $10.95 Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for... Add to Cart
Button SHIM $8.95 Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Pimoroni's SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or... Notify Me
3v3 Sustain for Raspberry Pi 4 $4.45 Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and... Add to Cart
Mini Base Board (B) Designed for Compute Module 4 $27.95 Waveshare 19602 - Mini Base Board (B) Designed For Raspberry Pi Compute Module 4 Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products Powerful functions in a credit card sized body Standard CM4 Socket And Color-Coded... Add to Cart
Pimoroni Zero LiPo Shim $13.95 Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with the tiny little Pimoroni Zero LiPo! It aims to give you the most compact power supply possible... Add to Cart